第一篇：建筑專業英語翻譯

建筑專業英語翻譯

原文：

Using Consultants for Community Comprehensive Planning1

When a community decides to develop or update its comprehensive plan, it is immediately plagued2 by a number of decisions regarding how should they develop it, what should be contained in it, how professional assistance should be used, and what form it should take.In the main, many communities having no, or a small, planning staff turn to professional planning consultants for assistance in the endeavor.This results in the establishment of a consultant selection process that can be as short as hiring the one firm someone knows about or utilizing a full scale “Request for Proposal” process.Consultant selection is important since the developed plan will bear the mark of the consultant as well as the community.Therefore, it is useful to first agree upon the type of consultant desired and then the purpose of the comprehensive plan update before embarking upon the consultant selection process.All consultants have, or should have, a particular approach to comprehensive planning—similar to doctors, lawyers, economists and other professionals.Planning consultants are not all alike in skills, approach, philosophy, and experience;community comprehensive planning is different from other forms of urban planning—it is not regional planning, metropolitan planning, corridor3 planning, project planning, or site planning.Because a consultant has experience in site planning or metropolitan planning does not mean that they are a skilled or experienced community comprehensive planner.Therefore, the selection of a planning consultant for comprehensive planning purposes should reflect an understanding and agreement with the consultant’s view as to the purpose of the plan development and the approach they will use.Such an understanding can easily be articulated4 by the consultant.While a consultant can bring sound technical skills and an objective viewpoint to the planning process, the key to developing a realistic and usable plan is to have the policies and programs for action emerge from the desires and capabilities of the community.To do this, the role and function of the consultant—for the duration of the project and within the immediate period following plan adoption—is to act as the technical area of the planning commission.This viewpoint is the result of several strongly held convictions borne out by experience in the comprehensive planning process, as well as in the implementation of such plans.Among these convictions:

? A plan is used only if it truly represents the political and social aspirations commonly held by the community and is responsive to the needs of its decision-makers.? A plan is used only if its intent is clearly understood at the outset and its format flexible enough to respond to the changing problems, needs, and desires of the community.? A plan is used only if it can be understood by the community’s decision-makers and if it fits into the process of local community development.Comprehensive planning is not an end in itself.Rather, the process and the product 1This text is from http://.plaguev.annoy 3 corridorn.a long narrow passage on a train or between rooms in a building, with doors leading off it 4 articulatev.speak distinctly

represent a tool to guide the Plan Commission and Board of Trustees in making growth management and redevelopment decisions.Such decisions encompass many aspects of community management, including subdivision5, rezoning, annexation6, historic preservation, economic development, housing, redevelopment, capital improvement and community design.To develop such a plan it is important that the consultant charged with developing the plan clearly understands the aspirations of the community and the limitations of the real world.Secondly, it is important that the local decision-makers accept the consultant as a professional who understands the needs and aspirations of the community.That is, it is necessary that a trusting relationship be built between the consultant and the clientand through them, the community as a whole.A comprehensive plan(or master plan)is a guide for moving a community from today to some point in the future.Just as a business or corporation may adopt a long-range strategic plan for their company, a community must also plan for its future through the development of a comprehensive plan.The process of comprehensive planning and the final product represents a tool to guide Planning Commissions, Zoning Boards, and local governing officials in making municipal policies and development decisions.These decisions encompass many aspects of community management, including subdivision, zoning, annexation, historic preservation, economic development, housing, redevelopment, capital improvement and community design.In developing such a plan, it is important that it serve the following purposes.It should provide a clear and supportable statement of the type of future that is desired.This statement must consist of:

? Goals: Community derived statements of aspirations

? Objectives: Statements of how the goals will be achieved

? Plans: Supportable illustrations of how the community should develop over time in terms of land use, transportation improvements, community, facilities, etc.? Policies and Programs: Supportable rules for decision-making, courses of action to gain the objectives and projects which can move the community toward its vision of the future

It should identify needed capital improvements.Public improvements, such as transportation, utility and other community capital improvements, provide the community’s primary method of directing growth so as to reach the “vision” of the plan.As such, a strong emphasis upon the type, phasing, cost and financial resources for such improvements is a necessary component of the plan.The plan must provide a realistic basis for the use of zoning and other land use and redevelopment controls and incentives7.subdivisionn.a product of subdividing, as a section of a department

annexationn.that which is annexed 7 incentivea.something that encourages you to work harder, start a new activity etc.6

翻譯：

地區綜合規劃中顧問的使用

當一個社區決定發展或更新它的綜合規劃時，會有大批折騰人的決策比如說 他們該怎樣發展；規劃應該包含些什么；使用什么樣的專業幫助以及該采取何種形式。

重要的是，在努力的過程中許多社區僅有或只有小部分負責的規劃員工會向專業的規劃顧問尋求幫助。這一現象就導致了一個顧問的選擇過程可以像雇傭一個彼此很了解的合伙人或像萬事具備的求婚過程一樣短暫簡單。鑒于一個完善的規劃可以顯現出顧問及社區的能力，所以顧問的選擇相當重要。因此，在開始顧問選擇程序之前最有效地是弄清楚到底需要哪一類的顧問，然后才是完善綜合規劃的目地。

所有的顧問都有或者應當具有特殊的應對綜合規劃的對策。就像 醫生 律師 經濟學家以及其他職業一樣。規劃顧問在技術，方法，哲學及經驗方面并不都一樣，社區綜合規劃和其他形式的城市規劃是不一樣的。它不僅僅是區域規劃，大城市規劃，走廊規劃，工程規劃或地址規劃。一個有豐富地址或大城市規劃經驗的顧問并比意味著他就是個有技術經驗的社區綜合規劃者。因此，一個綜合規劃中規劃顧問的選擇應該是有洞察力的并且顧問的觀點該與規劃發展目地和他們采用的途徑相一致。

顧問能輕易地分辨出這樣的洞察力。盡管顧問可以給規劃的過程帶來成熟的技術性技巧和明確的觀念但是開發一個現實并可用的規劃的關鍵是有社區期望和能力所必須的行動的政策和程序。為了做好這些，顧問的角色及職能是擔當計劃委員會的技術領域。（規劃必須在規劃所規定的時間內完成）這一觀點是由幾個確信的在不斷綜合規劃過程以及這類規劃執行中衍生出來的。這些堅持包括：

。只有當這一規劃真實的反應了地區的政治和社會的強烈愿望時并反應了決策者需求時才回被采用

。只有這一規劃的目的從一開始就能被理解并且它的形式很多樣能應對不斷改變的地區題，需求和想法

。只有規劃被地區決策者理解并能適應當地社區發展過程時才回被采用

綜合規劃并不是終結，相反的，這一過程和氣產品象征著領導規劃委員會以及董事會取得管理，重建決定的工具。這些決定包括了社區管理的許多方面。有進一步細分區制，附屬建筑，歷史保護，經濟發展，住房，重建，資金改善和社區設計。

為了發展這樣的規劃最重要的是負責這個規劃的顧問能清楚地了解社區的期望以及現實世界的約束。第二，當地決策者接受顧問的想法并把他當成能了解社區期望和需求的專業人士也很重要。也就是說一個建立在顧問與客戶之間的互信關系很必要。通過規劃委員會和城市理事會社區才是一個整體。

綜合規劃是引導社區從今天走向未來的好的向導，就像工商企業和公司為自身發展可能會采用一個長期的策略。社區也需要通過社區規劃的發展來計劃它的未來。社區規劃的過程及其最終的成品是一個引導規劃委員會，區域理事會和當地政府機關在做出市辦政策及發展決定時的一個好的工具。這些決定包括了社區管理的許多發面。如：進一步細分區制，附屬建筑，歷史保護，經濟發展，住房，重建，資金改善和社區設計。為深入發展這個規劃按下述條例來做很重要。

對于未來想要的類型得提供一個清晰地被廣接受的這個結算單包括:

。目標：結算單來源于社區強烈的愿望

。目地：結算單怎樣實現這一目標

。計劃：支持率闡明了社區在以后的時間內就土地使用，交通改善，設施的問題該怎樣發展

。政策與程序：做決定的規則，實現目地和工程這一行動的過程能社區轉移到未來的視

野上.這一系類的結算單需要資金的改善。

公共的改良,比如交通，公共事業及其他的公眾資金改善，給大眾提供基本的指向規劃夢想擴大的途徑。本身，一個關于類型，階段，花費及財政資源的強有力的強調是這個規劃成功的必要的組成部分。

規劃必須向地區的使用，其他土地征用，重建控制和刺激提供一個實際可行的基礎。

第二篇：專業英語翻譯

1)Electricity can be measured in amount and quality.電可以用數量和質量來度量。

2)Instrument transformers are installed on the high-voltage equipment.互感器安裝在高壓設備上。

3)Electric power is generated in power generating stations or plants.電能是在發電站或發電廠產生的。

4)The meters are calibrated and the scale is designed to read the value of the desired unit.這些儀表可以被校準并且設計了不同的量程，以便讀出期望的數值。

5)Electrical energy can be stored in two metal plates separated by an insulation medium.Such a device is called a capacitor, and its ability to store electrical energy is termed capacitance.It is measured in Farads.電能可以儲存在被一絕緣介質隔開的兩塊金屬板中，這樣的裝置被稱為電容器，它儲存電能的能力就被稱為電容。電容的測量單位是法拉。1)The signal should be filtered before it is amplified.The signal should be filtered before being amplified.放大信號前，應先對其進行濾波。

2)An object becomes hot.It is placed in the sun.Once being placed in the sun, an object becomes hot.物體放置在太陽下會變熱。

3)We must do various experiments before a new electronic product is designed.Before designing a new electronic product we must do various experiments.在設計一個新的電子產品之前，我們必須做各種實驗。

4)Changing resistance is a method for controlling the flow of the current.改變電阻是控制電流的一種方法。

5)Conducting electricity means the flow of electrons through an object.傳導電流意味著電子在物體內的流動。

1)The power supply, which is shown in block-diagram in Fig.1, is a single-phase switch-mode inverter.The power supply shown in block-diagram in Fig.1 is a single-phase switch-mode inverter.圖1中用框圖表示的電源是一個單相開關逆變器。

2)A three-phase circuit, as it was pointed out above, is merely a combination of three single-phase circuits.A three-phase circuit, as pointed out above, is merely a combination of three single-phase circuits.正如上面所指出的那樣，三相電路只不過是三個單相電路的組合。

3)The transistor, which is working with correctly polarities, can work as an amplifier.The transistor working with correctly polarities can work as an amplifier.工作于正確電源極性下的晶體管，作用就像放大器。

1）The capacity of individual generators is larger and larger so that the increasing demand of electric power is satisfied.The capacity of individual generators is larger and larger to satisfy the increasing demand of electric power.單臺發電機的容量越來越大，目的就是滿足不斷增長的用電需求。2)What does a fuse do? It protects a circuit.The function of a fuse is to protect a circuit.保險的作用就是保護電路。1)If it is possible, the open-loop control approach should be used in this system.If possible, the open-loop control approach should be used in this system.可能的話，這個系統應該使用開環控制方法。

2)As illustrated in Fig.1, there is a feedback element in the closed-loop system.As in Fig.1, there is a feedback element in the closed-loop system.就像圖1所示的那樣，這個閉環系統中有一個反饋元件。

3)The device includes an instrument transformation and a relay system which has two circuits in it.The device includes an instrument transformation and a

relay system with two circuits in it.這個裝置包括一個互感器和一個有兩個電路的繼電器系統。

1)It has been mentioned above that the electrons in a metal

are able to move freely through the metal, that their motion constitutes an electric current in the metal and that they play an important part in conduction of heat.前面已經提到：金屬中電子能自由地通過金屬，電子的移動在金屬中形成了電流，電子在熱傳導中起著重要的作用。

2)The reluctance motor operates synchronously at a speed which is determined by the supply frequency and the number of poles for which the stator is wound.磁阻電動機以某一速率同步運轉，該速率是由電源頻率和定子繞制的級數決定的。

3)The testing of a cross-field generator will be described in this section with chief reference to the tests that are normally taken on every machine before it leaves the makers works.交磁發電機的試驗將在本節中敘述，它主要涉及每臺電機在離開制造廠前應進行的試驗。1)All radiant energies have wavelike characteristics, which are analogous to those of waves moving through water.All radiant energies have wavelike characteristics analogous to those of waves moving through water.所有的輻射能都具有波的特性，與水中移動的波的特征相似。

2)The instruments present include some digital ones which are relative to DSPs.The instruments present include some digital ones relative to DSPs.到場的儀器中還有一些與DSP有關的數字儀器。

1.As the system expands and higher voltage levels become necessary for transmission, the older transmission lines are often relegated to subtransmission function.隨著系統的擴大和更高的電壓等級為輸電所必需，舊的輸電線路往往被移交給中壓輸電功能。

1.Roughly, the capability of lines of the same length varies at a rate somewhat greater than the square of the voltage.粗略的講，長度相同的線路的容量，以比電壓的平方略大的比率變化。

2.No definite capability can be specified for a line of a given voltage, however, because capability is dependent on the thermal limits of the conductor, allowable voltage drop, reliability, and requirements for maintaining synchronism between the machines of the system, which is known as stability.然而，無法為給定電壓等級的線路指定確切的容量，這是因為容量取決于導線的發熱極限、允許的電壓降落、可靠性和維持系統中的發電機同步的要求（這被認為是穩定性）。

1.Capacitance exists between the conductors and is the charge on the conductors per unit of potential difference between them.電容存在于導體之間，等于導體上的電荷（電量）與導體間的電勢差之比。或：電容存在于導體之間，等于導體之間單位電壓對應的電量。“A per unit of B” 表示 “單位B上的A” 或者“A/B”。

2.Balance of the three phases can be restored by exchanging the positions of the conductors at regular intervals along the line so that each conductor occupies the original position of every other conductor over an equal distance, as shown in Fig.3.1.如圖3.1所示，沿線路方向每隔一定間隔就交換導線位置，使每根導線都能占據具有相同輸電距離的其他各導線的初始位置，以重建三相平衡。

Electrical energy can be stored in two metal plates separated by an insulating medium.Such a device is called capacitor or condenser.Its ability to store electrical energy is capacitance.It is measured in farads 電能可儲存在由一絕緣介質隔開的兩塊金屬極板內。這樣的裝置稱之為電容器，其儲存電能的能力稱為電容。電容的測量單位是法拉。

1.Small industrial customers are supplied by primary feeders at this voltage level from the primary system, which also supplies the distribution transformers providing secondary voltages over single-phase three-wire circuits for residential and commercial customers at 120 V/240 V.小型工業用戶由一次系統中此電壓等級的一次饋線供電。一次系統也給經過單相三線電路為居民用電和商業用戶提供120V/240V二次電壓的配電變壓器供電。

2.As illustrated in Fig.6.1, the aggregated load represented at a transmission substation(bus A)usually includes, in addition to the connected load devices, the effects of substation step-down transformers…

如圖6.1所示，在輸電變電站（母線A）所給出的集合負荷，除了所連接的負荷設備以外，通常還包括變電站降壓變壓器的影響……。

1.Roughly, loads are devices those consume electric energy or electric power consumed by customers mainly in distribution system.粗略的講，負荷是主要在配電網中消耗電能的設備或者由用戶消耗的功率。

2.The loads absorb electric energy from the power system and converts it into energy of other forms, which may be heat energy to heat water or to melt irons, or mechanical energy to drive a machine, etc.負荷從電力系統中吸收電能，并將其轉換為其他形式的能量，可能是燒水或溶化鋼鐵的熱能，或者是驅動機器的機械能等。

3.This kind of loads, especially those consume energy calculated by standard coals more over 10 thousands of tons per year, has a name of high energy consuming loads.這種負荷，尤其是那些年耗能萬噸標準煤以上的負荷，被稱為高耗能負荷。

1.The synchronous machine as an AC generator driven by a

turbine is the device which converts mechanical energy to electrical energy, in powers ranging up to 1500MW.作為由渦輪機驅動的交流發電機，同步電機是將機械能轉化為電能的設備，其功率范圍高達1500MW。

1.Hydropower plants can cause low dissolved oxygen levels in the water, a problem that is harmful to riverbank habitats.水電廠會導致水中的氧氣溶解度降低——（這是）一個對岸邊生存環境有害的問題。

2.For instance, in the United States, water power accounts for less than 20% of the total and that percentage will drop because most of the available sources of water power have been developed.例如，在美國，水電在全部電力中所占的比例不到20%，并且，因為大多數可用的水電資源已被開發，該百分數還會下降。

1.Most stations have ratings between 200 MW and 1500 MW so as to attain the high efficiency and economy of a large installation.大多數電站的額定值在200MW到1500MW之間，以實現大站的高效經濟（運行）。

2.Thermal stations are usually located near a river or lake because large quantities of cooling water are needed to condense the steam as it exhausts from the turbines.熱電廠通常位于河流或湖泊附近，這是因為需要大量的冷卻水在蒸汽從汽輪機排出時將其冷凝。

1.Nuclear plants fueled by uranium account for a continually increasing share of the load, but their construction is slow and uncertain because of the difficulty of raising capital to meet the sharply rising cost of construction, constantly increasing safety requirements which cause redesign, public opposition to the operation of the plants, and delays in licensing.Flowing through a circuit, the current will lose part of it energy.當電流流過電路時，要損耗掉一部分能量。（現在分詞短語作狀語）

Doing experiment is of great help to us.做實驗對我們的學習是很有幫助的。（動名詞作主語）By changing the resistance，we can change the current.通過改變電阻，我們就能改變電流。（動名詞作介賓）Mechanization is using machines instead of hand labor.機械化就是用機器來代替手工勞動。（動名詞作表語）

When an electric current flow through a wire it meets some opposition.當電流流過導線時，它會遇到某種阻力。（狀語從句）

Before one studies a system, it is necessary to define and discuss some important terms.在我們學習系統之前，必須定義并討論一些重要的術語。（狀語從句）It is possible that we use a computer to solve these complicated problem.我們可以用計算機來解這些復雜的題目。（表語從句）

You should determine which of the following functions is analytic.你應當確定下列函數中哪一個是解析式。（賓語從句）The fact is that radio waves travel as fast as light does.事實是無線電波的傳播速度與光速一樣快。（表語從句）The places where small computers can be used appear endless.可以使用小型計算機的場合似乎是無止境的。（定語從句）The instrument that we often use is very good in quality.我們經常使用的那臺儀器質量很好。（定語從句）

The places where small computers can be used appear endless.可以使用小型計算機的場合似乎是無止境的。（定語從句）The instrument that we often use is very good in quality.我們經常使用的那臺儀器質量很好。（定語從句）

Now we can determine where the slope is zero.現在我們可以求出何處斜率為零。（賓語從句）This is how a computer works.這就是計算機的工作原理。（賓語從句）Electrons always move toward where the potential is higher.電子總是朝向電位較高的地方移動。（介賓從句）

The fact that everything around us is matter is known to all.我們周圍的一切東西均是物質這一事實是大家都知道的。（同位語從句）Section 2 Exercise 3

Section 3 Exercise3 必須強調的是線性電阻器是一個理想的電路元件；它是物理元件的數學模型。我們可以很容易地買到或制造電阻器，但很快我們發現這種物理元件只有當電流、電壓或者功率處于特定范圍時其電壓——電流之比才是恒定的，并且這個比值也取決于溫度以及其它環境因素。我們通常應當把線性電阻器僅僅稱為電阻器。只有當需要強調元件性質的時候才使用更長的形式稱呼它。

而對于任何非線性電阻器我們應當始終這么稱呼它，非線性電阻器不應當必然地被視為不需要的元件。

Section 4 Exercise 3 如果一個電路有兩個或多個獨立源，求出具體變量值（電流或電壓）的一種方法是使用節點分析法或網孔分析法。另一種方法是求出每個獨立源對變量的作用然后把它們進行疊加。而這種方法被稱為疊加法。疊加法原理表明線性電路某個元件兩端的電壓（或流過元件的電流）等于每個獨立源單獨作用時該元件兩端的電壓（或流過元件的電流）的代數和。Section 5 Exercise 3 相電壓與相電流之比等于電路的阻抗，符號為字母Z，阻抗是一個具有量綱為歐姆的復數量。阻抗不是一個相量，因此不能通過把它乘以

并取其實部把它轉換成時域形式。但是，我們把電感器看作是通過其電感量L表現為時域形式而通過其阻抗

表現為頻域形式，電容在時域里為電容量C而在頻域里為

，阻抗是某種程度上的頻域變量而非時域變量。

Section 6 Exercise 3

第三篇：專業英語翻譯

介紹

硒(Se)是一個對人類和動物而言很重要的微量營養素,但是Se毒性和Se缺乏發生在世界不同的地方(弗蘭肯伯格和本森,1994)。硒能提高活動的自由羥基自由基(OH-)導致高氧化應激損害生物(趙et al,200

8)。Se這種基本的或有毒的特性在生物中不僅取決于其濃度狀況,而且也在于其直接影響吸收和生物利用度的化合物(米凱爾森et al，1989;倫茨et al，2008)。在水系統中硒酸鹽和亞硒酸鹽是主要的物質(雅各布斯,1989),然而,亞硒酸鹽很容易吸附于土壤礦物質，所以高濃度的硒酸鹽是工業廢水污染水域中主要的硒化合物。

鋁、鐵、硅氧化物是普遍存在于地球地殼的礦物，他們通常被用于除去水中污染物,因為鋁和鐵氧化物具有較高的表面積和零點電荷(i.e,86范圍內，在Al(III)/SiO2 中的亞硒酸鹽吸附受電解

質濃度影，這并不表示pH值的增長。Hayes博士(1987年)增加報道,亞硒酸鹽吸附在吸附劑、針鐵礦(a-FeOOH)，形成一個內球體復合體，硒酸鹽形成一個弱外球體，然后硒酸鹽在吸附劑會受在電子雙層理論上易溶效應的影響。圖2顯示在Al(III)/SiO2體系中，用Al(III)/SiO2比Fe(III)/SiO2對硒酸鹽的和亞硒酸鹽除去效率更大。當基本溶液添加到Al(III)/SiO2體系中,鋁和二氧化硅形成配合物以增加二氧化硅帶負電荷表面的吸附地方。因此一個Ph=5.0和0.01M電解質溶液被選作等溫、動力學、和吸附實驗。

3.2.2吸附等溫線

為了探討吸附能力，一系列的亞硒酸鹽和硒酸鹽溶液和在pH=5下用24h準備的兩個二元氧化物進行振蕩。吸附數據通過Langmuir 等溫線裝備好（r 2> 0.858,P < 0.01(n=7))(圖

3、表2)。相關系數表明Langmuir等溫線模型適用于通過二元氧化系統來描述亞硒酸鹽和硒酸鹽的吸附平衡。擬合數據顯示，分別地由Al(III)/SiO2吸收硒酸鹽和亞硒酸鹽的最大吸附容量(Qmax)是32.7和11.3毫克/克，由Fe(III)/SiO2吸收硒酸鹽和亞硒酸鹽的 Qmax是 20.4和2.4毫克/克。就硒物種的吸附能力考慮, Al(III)/SiO2和Fe(III)/SiO2似乎比粗鋁或鐵氧化物涂層砂高得多(Lo和Chen,1997，Kuan et al,1998)。兩個二元氧化物系統可以歸于微粒增加了硒物種和吸附劑接觸。

在兩個二元氧化物系統中亞硒酸的吸附能力比硒酸鹽的高，這和基于第一個酸度常數來區分各種陰離子親和力的結果是一致的(Hayes,1987，Hayes et al,1988)。亞硒酸鹽的化學特性和幾何結構類似于磷酸鹽,而硒酸鹽是類似于硫酸鹽(Hayes 1987，wijnja和Schulthess,2000)，兩個二元氧化物系統對亞硒酸鹽的吸附大于硒酸鹽。

對亞硒酸鹽和硒酸鹽吸附而言，Al(III)/SiO2體系相比Fe(III)/SiO2體系顯示了一個更大的容量，來源于Al(III)/SiO2體系對硒含氧陰離子有更多的正電荷造成的高親和力(圖1)。鐵顆粒在二氧化硅上的沉淀物不能增加任何吸附地方，二氧化硅的帶負電荷的表面增加了硒含氧陰離子和二氧化硅之間的排斥力。因此，Al(III)/SiO2對硒的Qmax高于Fe(III)/SiO2的(表2)。至于二元氧化物系統吸附亞硒酸鹽和硒酸鹽的機制,之前的光譜研究表明,硒的吸附是鋁-和鐵氧化物形成內球面配合物的配位體與羥基在礦物表面交換(Peak,2006)。為了研究吸附過程的機制,我們使樣品遭受到二元氧化物系統吸附的硒的XANES和EXAFS光譜。

3.3吸附動力學

描述溶質吸附率的吸附動力學控制吸附反應的停留時間是一個決定吸附效率的重要特征。圖.4表明兩個二元氧化物系統在不同的時間間隔和偽二級動力學模型的仿真顯示了硒的吸附數據。二元氧化物系統吸附亞硒酸鹽和硒酸鹽的偽平衡方法比那些在鋁或鐵涂料石英沙更為迅猛(Lo and Chen,1997，Kuan et al,1998)。對在Al(III)/SiO2 and Fe(III)/SiO2上的亞硒酸鹽，2 h的接觸會使95%的亞硒酸鹽被完全除去，吸附也會接近平衡(圖4a)。個別的硒酸鹽去除百分比可以達到99，在Al(III)/SiO2和Fe(III)/SiO2中30分鐘可以除去96%，吸附也接近平衡(圖4b)。兩個二元氧化物系統的更大的表面地區和更小的顆粒尺寸提高吸附反應的概率。已安裝的動力學數據零、第一、偽第二、二階，拋物線，Elovich模型，評估r2和假定值，總安裝數據沒有顯示。這個偽二階動力學模型是最好的模型去描述二元氧化系統的動力學數據。表3表明顯示了通過t/qt的圖形從偽二級動力學模型得到確切系數(r2)和其他參數來確定V0和qeq所有的媒體價值。這個偽二階模型很好的符合了兩個二元氧化物的系統運動數據(r2 > 0.999,P < 0.001,n=18)。亞硒酸鹽在Al(III)/SiO2上的最初的吸附率是6.25mg/gh，少于硒酸鹽的(57.5mg/gh)，在Fe(III)/SiO2上的亞硒酸鹽和硒酸鹽的比例為8.36比4.89mg/gh。數據顯示，對硒酸鹽Al(III)/SiO2具有更高的親和力，在Fe(III)/SiO2上對硒酸鹽的吸附能力大于亞硒酸鹽。不像亞硒酸鹽,上清液pH值是穩定的，硒酸鹽平衡濃度的pH值從5.0增加到8.0，表明氫氧離子在吸附過程中被釋放出來。因為亞硒酸鹽強烈的通過結合金屬氧化物表面形成更強壯的內球面復合物，在緩慢的過程中亞硒酸鹽需要花更多的時間到達平衡(Balistrieri and Chao,1987，Hayes,1987，Neal et al,1987，Zhang and Sparks,1990，Scott and Morgan, 1996)。

3.4XAS數據分析

從XANES的吸附反應可知，氧化狀態在硒物種和二元氧化物系統之間相互作用沒有改變。圖5和表4表

明了在樣品上進行的硒的K-edge EXAFS在pH=5.0時亞硒酸鹽在二元氧化物系統的吸附結論。在圖5a,b上顯示了這個徑向結構功能(RSFs)的傅里葉轉換數據。在所有亞硒酸樣本中，明確證明在RSFs上有兩個外形：第一外形是Se-O(在1.72A下用3 O安裝)，第二外形Se-Al或Se-Fe在兩個二元氧化物系統上(圖5)。這個距離是與以前在亞硒酸鹽進行的EXAFS實驗數據達到了良好的統一，這表明對水合和吸附的亞硒酸鹽的Se-O鍵的距離1.68-1.72 A(Manceau and Charlet,1994，Peak et al,2006，Peak,2006)。基于簡單的幾何約束，最好的亞硒酸鹽結合環境任務是在Al(III)/SiO2上(在3.22A下用2個Al安裝成Se-Al)在pH=5下是一個雙配位基、雙核的表面復合物(鍵長的范圍是～3.2A)。亞硒酸鹽吸附在其他鋁軸承礦物表面這個和以前的研究(Hayesetal,1987)達成良好的協議，這也報道了雙配位基、雙核的表面絡合作用。在針鐵礦上有內球體硒酸鹽的存在是符合Manceau and Charlet(1994)的工作結果的他們報道類似的Se-Fe鍵距離是3.29A相應的在那個工作結果是3.31A(表4)。在水合的鐵氧化物(HFO)下，然而，他們發現他們最好的數據是0.4鐵在2.80A和1.8鐵在3.29A描述的。他們確定一個雙配位基的單核表面復合物的距離是2.80A和一個雙配位基的雙核的表面復合物的距離是3.29A。亞硒酸鹽在Fe(III)/SiO2上的結果表明距離為3.05A形成雙配位基的單核表面復合物。

在二元氧化系統上硒酸鹽局部結構是由EXAFS裝置指導的(表4和圖5b)。在所有的硒酸鹽樣品中,第一個形式是在RSFs上的Se-O(在1.66A用4O裝配)與先前發表的水合和吸附的硒酸鹽Se-O距離是一致的(Hayes et al,1987，Peak and Sparks,2002)。這個在硒酸鹽吸附樣本的Se-Al距離鍵長及配位數(3.32A、CN=1)表明研究在Al(III)/SiO2表面的硒酸鹽的協調環境是一個內球體表面復合物。然而，Se-Fe的鍵長(3.04A)表明在Fe(III)/SiO2上的硒酸鹽形成了雙配位基的單核配合物(Hug,1997，Peak and Sparks,2002)。EXAFS擬合數據表明硒酸鹽在Fe(III)/SiO2的鍵長比在Al(III)/SiO2的長。根據EXAFS原則, x射線吸收原子和周圍原子的距離就是一個鍵長。鍵長越長，中心和周圍的原子的相互作用越弱。在Fe(III)/SiO2體系上的亞硒酸鹽和硒酸鹽的Se-金屬鍵長實際上是一樣的。鍵長適合特性的估計精度是±0.02A。Peak和Sparks(2002)表明硒酸鹽在赤鐵礦的形式只有內球體表面復合物，在針鐵礦和重質燃料油上是外球體和內球面表面復合物的混合形式。EXAFS結果表明在Fe(III)/SiO2的硒酸鹽形成內球體復合物。雖然在pH=5.0硒酸鹽和亞硒酸鹽在二元氧化物系統形成內球體復合物,數據表明在二進制元氧化物系統上亞硒酸鹽比硒酸鹽形成了更強的表面復合物。結論

根據研究結果,我們提出在二元氧化物系統上鋁或鐵氧化物可以修改二氧化硅的負表面電荷,應用二元氧化物系統吸附陰離子、硒含氧陰離子。從這項研究中,我們觀察到Al(III)/SiO2和Fe(III)/SiO2從水溶液清除硒含氧陰離子是有效的。然而，Al(III)和SiO2表面強烈聯系導致其整個表面電荷比Fe(III)/SiO2更加積極, Al(III)/SiO2對硒的吸附能力比Fe(III)/SiO2的更強。在pH=5.0, 在Al(III)/SiO2和Fe(III)/SiO2中的亞硒酸鹽形式內球體復合物，分別地包括雙配位基和單配位基。然而, 在Al(III)/SiO2上的硒酸鹽形成較弱的內球體單配位基復合物，在Fe(III)/SiO2上的硒酸鹽也是這樣的。根據硒酸鹽的鍵長, 硒和鐵高親和力導致了之間的鍵長更短。調查結果得出目前的研究的基本意義是在推進前沿二元氧化物系統化學專業知識。

第四篇：專業英語翻譯

樁筏基礎的簡化設計方法

摘要：在筏板基礎本身并不能滿足設計要求情況下，可通過在筏板下增加樁來提高其承載力。合理的布置一定量的樁，可以提高樁筏基礎的承載力和減少總沉降和差異沉降。本文分析了簡化計算方法的過程，對樁筏基礎的初步設計提供了有用的依據。它包括兩個階段：

1.樁筏基礎整體性能的評價；

2.單柱荷載作用下的性能評價。

第五篇：專業英語翻譯

Forces of Interactions between Bare and Polymer-Coated Iron and Silica: Effect of pH, Ionic Strength, and Humic Acids The interactions between a silica substrate and iron particles were investigated using atomic force microscopy-based force spectroscopy(AFM).The micrometer-and nanosized iron particles employed were either bare or coated with carboxymethyl cellulose(CMC), a polymer utilized to stabilize iron particle suspensions.The effect of water chemistry on the forces of interaction was probed by varying ionic strength(with 100 mM NaCl and 100 mM CaCl2)or pH(4, 5.5, and 8)or by introducing 10 mg/L of humic acids(HA).When particles were uncoated, the forces upon approach between silica and iron were attractive at pH 4 and 5.5 and in 100 mM CaCl2 at pH 8, but they were negligible in 100 mM NaCl buffered to pH 8 and repulsive in water buffered to pH 8 and in HA solutions.HA produced electrosteric repulsion between iron particles and silica, likely due to its sorption to iron particles.HA sorption to silica was excluded on the basis of experiments conducted with a quartz-crystal microbalance with dissipation monitoring.Repulsion with CMC-coated iron was attributed to electrosteric forces, which were damped at high ionic strength.An extended DLVO model and a modified version of Ohshima’s theory were successfully utilized to model AFM data.PH、離子強度和腐殖酸對硅與裸露鐵粒子和高分子聚合物包裹鐵粒子之間相互作用的影響 利用以原子力顯微鏡為基礎的光譜法研究石英基片和鐵顆粒之間的相互作用。微米和納米鐵顆粒采用的都是赤裸的或羧甲基纖維素包裹的——一種用于穩定鐵顆粒懸浮液的聚合物。通過不同離子強度（100mM氯化鈉和100mM氯化鈣）或PH值（4，5.5，和8）或通過引入10毫克/升的腐殖酸探討水化學環境對這種相互作用力的影響。當粒子裸露時，硅和鐵的相互接近的吸引力出現在PH值4和5.5。加100mM氯化鈣時出現在PH值為8的時候。但在PH為8的100毫米氯化鈉緩沖溶液中它們是可忽略的，在PH為8的水和腐殖酸溶液中表現為相互排斥。腐殖酸使鐵顆粒和二氧化硅之間產生靜電斥力，可能由于其吸附鐵顆粒。通過進行了石英晶體微天平與耗散監測的實驗，腐殖酸吸附硅膠的可能性被排除在外。與羧甲基纖維素包鐵顆粒的斥力是由于靜電力量，這種靜電力在高離子強度會減弱。一個擴展的 DLVO模型和Ohshima理論修改后的版本成功地擬合了原子力顯微鏡得到的數據。