第一篇:塑料模具專業用語 中英文對照
塑料模具專業用語中英文對照
一.模具術語。
入水:gate
進入位: gate location
水口形式 gate type
大水口edge gate
細水口 pin-point gate
水口大小 gate size
轉水口switching runner / gate 唧嘴口徑 sprue diameter
流道runner
熱流道hot runner,hot manifold 熱嘴冷流道 hot sprue / cold runner 唧嘴直流 direct sprue gate
圓形流道round(full/half runner 流道電腦分析mold flow analysis 流道平衡 runner balance 熱嘴hot sprue
熱流道板 hot manifold
發熱管 cartridge heater
第二篇:牙科專業用語中英文對照
牙科專業用語中英文對照通用類
頰面 Buccal 舌面 Lingual 腭面 Palatal 近中面 Mesial 遠中面 Distal 牙合面 Oeclusal 切端 Incisal 頸部 Neck 前牙 Anterior 中切牙 Central 側切牙 Latral
尖牙 Canine/cuspid 后牙 Posterior 雙尖牙 Pre-Molar
第一雙尖牙 First Prc-Molar 第二雙尖牙 Second Pre-Molar 磨牙 Molar
第一磨牙 First Molar 第二磨牙 Second Molar 智慧牙 Wisdom 覆牙合 Over Bite 覆蓋 Over Jet 缺失牙 Pontic 牙模 Model 顏色 Shade
形態 Shape/Anatomy 金屬牙合面 Metal Occlusal 金屬舌面 Metal Backing 緩沖(離開)Relief 牙合架 Articulator 工作模 Master Model 對牙合模 Opposite Model 參考模 Study Model
連接模 Splint/Joint/Connect 分開 Separate 烤瓷冠 CMC 烤瓷橋 CMB
膠托類
全口腔膠托 Full / Full Acrylic Denture ,F/F
半口膠托 Full Upper or Lower Acrylic
Denture
局部膠托 Partial Acrylic Denture ,P/-or-/p
鋼絲卡環 S.S.Wire Clasp 鋼絲牙合支托 S.S.Rest
個別托盤 Special Tray,S/T 蠟堤 Bite Block 膠托修理 Repair 軟膠 Soft Lining 襯墊 Reline
彈性義齒 Flexible Denture / Valplast 膠托加網 Add Mesh
鋼托類
鋼托
Cobalt-Chrome
Centure/Vatallium
舌桿 Partial Denture(美式)UPD/LPD 腭板 Lingual Bar
連續卡環 Palatal Plate
牙合支托 Continue Clasp/Kennedy Clasp
舌板 Occlusal Rest 上半口網狀鋼 Lingual Plate 半口膠托 Full Upper Mesh
鋼托上加鋼牙 Full Upper or Lower Denture
馬蹄形 Dummy 前后桿 Horse Shoe
Double Bar / Ant.& Post.Bar
烤瓷類
貴金屬烤瓷 Porcelain on Precious Alloy
半貴金屬烤瓷 Porcelain on S/P(Semi-Precious)
非貴金屬烤瓷 Porcelain on N.P.(Non-Precious)
瑪利蘭橋 Maryland Bridge 嵌體 Inlay 樁核 Post
高嵌體 Onlay 瓷貼面 Porcelain Veneer / Porcelain 假牙齦/牙肉 Gum Porcelain 全瓷冠 Full Ceramic 金屬邊 Metal Margin
種植牙 Implant
樁連冠 Post Crown/Down Crown 通透性的 Transparent 透明的 Translucent 不透明的 Opacity Crown(In-ceram)
瓷邊 Porcelain Margin/Porcelain Shoulder
涂金粉 Gold Plating 金屬冠 Full Metal Crown
一. At the registration掛號
1.What can I do for you? 2.What is wrong with you? 3.Do you want to see a dentist?
4.Which speciality do you want to register with? 您要掛哪個科的號?
5.Do you want to have your tooth pulled(tooth filled)? 您要拔牙補牙嗎?
6.For a filling? A denture? Or a cleaning? 補牙?鑲牙?還是潔牙?
7.Is this your first visit to this dental clinic?
8.May I have your address, telephone number, age and occupation, please? 請告訴我您的地址,電話號碼,年齡,職業。
9.Please write your name and date of birth on this card.10.Please fill out this record card.請填寫這張記錄卡。
11.Do you have a registration card? 您有掛號證嗎?
12.When did you come last?
13.Do you have an appointment? 您有預約嗎?
14.We are fully booked today.今天已經約滿了。
15.Please show this card at the registration desk every time you come.每次來掛號,請出示這張卡
16.Please pay for the registration.請交掛號費。
17.Here is your receipt and change.這是收據和找回的零錢。
I get you 125.5(one hundred twenty-five point five yuan),and this is 30.5(thirty point five yuan)in change.18.This is your registration card.Please don’t lose it and bring it here whenever you come.這是您的掛號證,請不要遺失,每次來時帶著它。
19.Please wait in the waiting room.請在候診室等。
20.The doctor will see you soon.21.The doctor now is with a patient.22.Your turn is next.23.There are two more patients before you.24.The patient before you is a rather complicated case, I’m sorry you will have to wait at least half an hour.前面那個病人比較復雜,您至少還得等半小時。
25.Please come into the treatment room, will you? 請進治療室。
三.Questions about medical history 既往史的詢問
1.First, I will ask you about your general health and allergies.首先,我需要了解您的全身健康狀況和過敏史。
2.How are your health conditions now?(Excellent, Average, Poor)您現在的身體狀況如何?
3.Do you have any chronic disease? 您有什么慢性病嗎?
4.Have you ever had a serious illness? 您有重大疾病史嗎?
5.Have you had any operations in the past? 您有手術史嗎?
6.Have you had any serious accidents or injuries? 您有外傷史?
7.Have you ever had a blood transfusion? 您有輸過血。
8.Do you have or have you ever had the disease of heart, liver or kidney? 您有心臟病,肝病和腎病。
9.Are you suffering from hypertension? 您有高血壓病史嗎?
10.Have you had any diabetes? 您有糖尿病史嗎?
11.Do you have a fever? 您有發燒嗎?
12.How is your appetite? 您的食欲怎樣?
13.Do you have any trouble in swallowing food? 您有吞咽困難的現象嗎?
14.Do you take any medication regularly? 您目前有長期用藥嗎?
15.Are you pregnant? 您有懷孕嗎?
16.Is your menstrual cycle regular? 您的月經規律嗎?
17.When did your last period begin? 您末次月經是什么時候?
18.Do you have any allergy? 您有過敏史嗎?
22.Have you ever had an injection for anesthesia? 您以前用過麻醉藥嗎?
23.Have you ever had abnormal bleeding from an injury of a tooth extratction? 您有過傷口或拔牙創口出血不止的經歷嗎?
24.Have you ever had complications from dental treatment? 您有過與治牙相關的并發癥嗎
四. Questions about general symptoms 一般癥狀的詢問
1.What is your trouble?
2.Tell me what symptoms you have? 能描述一下您的癥狀嗎?
3.When did you first notice such conditions? 您第一次發現這種情況是什么時候?
4.Have you already attended another hospital with your problems? 您有在其他醫院看過嗎?
5.Please tell me the name of the hospital, the period and the type of treatment you received.請告訴我醫院的名字,治療方法和時間。
6.When were you under the care of the doctor recently, tell me the symptoms you had.您什么時候接受的治療,告訴我你的癥狀。
7.When did you become swollen up like this? 您什么時候腫成這樣的。
8.How long did it bleed? 出血多長時間?
9.When did the tooth last have dental treatment? 最后一次治牙是什么時候?
五.Questions about pain 疼痛的詢問
1.When did the tooth start to hurt? 這牙什么時候開始痛?
2.What kind of pain did you feel? 是那種類型的痛?
3.Can you describe the pain? Is it a dull pain/a sharp pain/a throbbing pain? 您能描述一下您的疼痛嗎?是鈍痛/銳痛/跳痛?
4.Does it come and go or come suddenly? 是間斷痛還是突發痛? 5.Does it spread anywhere else? 疼痛想其他地方放射嗎?
6.Was it sensitive to sweet food/cold water? 對甜食/冷水刺激敏感嗎
7.Did it hurt after eating and drinking? 吃飯和喝水時痛嗎?
8.Did the pain interfere with sleep? 夜間疼痛加重嗎?
9.Did pressure make it hurt? 您有咀嚼痛嗎?
10.Do you feel pain when I tap on this tooth? 當我叩您的牙時有疼痛嗎?
六. Questions about periodontal disease 牙周病的詢問?
1.Did you have any bleeding from your gums? 您的牙齦有出過血嗎?
2.Did your gums bleed when you brush your teeth? 您刷牙時有出血嗎?
3.Did your gums bleed when you eat hard food, like an apple? 咬硬物時,比如蘋果有出血嗎牙齦?
4.Have you noticed any bleeding spots on your skin? 您皮膚上有出血點嗎?
5.Did the gums bleed for no apparent reason at all? 您的牙齦是不明原因的出血嗎?
6.Did food get caught between your teeth? 您塞牙嗎?
7.Do you feel any of your teeth loose? 您感覺哪個牙有松動嗎?
8.Do you notice that you breathe through your mouth? 您注意到您有口呼吸嗎?
9.Do you snore? 您有打呼嚕嗎?
10.Do you have a habit of grinding your teeth at night? 您有夜間磨牙的嗎?
11.Do you have a habit of clenching your teeth? 您有緊咬牙的習慣嗎?
12.Do you have anyone in your family who had serious gum disease? 您的家人有患牙齦病的嗎?
13.Has a dentist ever told you that you have gingivitis or periodontitis? 有醫生告訴過您,您有牙齦炎或者牙周炎嗎?
I get you 125.5(one hundred twenty-five point five yuan),and this is 30.5(thirty point five yuan)in change.答案補充: I forgot to give you 0.3(thirty cents)in change.Landline 固定電話
第三篇:采購專業用語(中英文對照)
專業用語
貨運
(1)FCA(Free Carrier)貨交承運人
(2)FAS(Free Alongside Ship)裝運港船邊交貨
(3)FOB(Free on Board)裝運港船上交貨
(4)CFR(Cost and Freight)成本加運費
(5)CIF(Cost,Insurance and Freight)成本、保險費加運費
(6)CPT(Carriage Paid To)運費付至目的地
(7)CIP(Carriage and Insurance Paid To)運費、保險費付至目的地
(8)DAF(Delivered At Frontier)邊境交貨
(9)DES(Delivered Ex Ship)目的港船上交貨
(10)DEQ(Delivered Ex Quay)目的港碼頭交貨
(11)DDU(Delivered Duty Unpaid)未完稅交貨
(12)DDP(Delivered Duty Paid)完稅后交貨
主要船務術語簡寫:
(1)ORC(Origen Recevie Charges)本地收貨費用(廣東省收?。?/p>
(2)THC(Terminal Handling Charges)碼頭操作費(香港收?。?/p>
(3)BAF(Bunker Adjustment Factor)燃油附加費
(4)CAF(Currency Adjustment Factor)貨幣貶值附加費
(5)YAS(Yard Surcharges)碼頭附加費
(6)EPS(Equipment Position Surcharges)設備位置附加費
(7)DDC(Destination Delivery Charges)目的港交貨費
(8)PSS(Peak Season Sucharges)旺季附加費
(9)PCS(Port Congestion Surcharge)港口擁擠附加費
(10)DOC(DOcument charges)文件費
(11)O/F(Ocean Freight)海運費
(12)B/L(Bill of Lading)海運提單
(13)MB/L(Master Bill of Lading)船東單
(14)MTD(Multimodal Transport Document)多式聯運單據
(15)L/C(Letter of Credit)信用證
(16)C/O(Certificate of Origin)產地證
(17)S/C(Sales Confirmation)銷售確認書(Sales Contract)銷售合同
(18)S/O(Shipping Order)裝貨指示書
(19)W/T(Weight Ton)重量噸(即貨物收費以重量計費)
(20)M/T(Measurement Ton)尺碼噸(即貨物收費以尺碼計費)
(21)W/M(Weight or Measurement ton)即以重量噸或者尺碼噸中從高收費
(22)CY(Container Yard)集裝箱(貨柜)堆場
(23)FCL(Full Container Load)整箱貨
(24)LCL(Less than Container Load)拼箱貨(散貨)
(25)CFS(Container Freight Station)集裝箱貨運站
(26)TEU(Twenty-feet Equivalent Units)20英尺換算單位(用來計算貨柜量的多少)
(27)A/W(All Water)全水路(主要指由美國西岸中轉至東岸或內陸點的貨物的運輸方式)
(28)MLB(Mini Land Bridge)迷你大陸橋(主要指由美國西岸中轉至東岸或內陸點的貨物的運輸方式)
(29)NVOCC(Non-Vessel Operating Common Carrier)無船承運人
貨運用語中英文對照
貨物 goods | | freight | | cargo
運輸 transportation | | transit | | conveyance
運送 to transport | | to carry | | to convey
運輸業 transportation business | | forwarding business | | carrying trade
運輸代理人 a forwarding agent
承運人 a freight agent | | a carrier
船務代理人 a shipping agent
陸上運輸 transportation by land
海上運輸 transportation by sea
貨物運輸 goods traffic | | freight traffic | | carriage of freights | | carriage of goods
貨輪 cargo boat | | freighter | | cargo steamer | | cargo carrier
火車 goods-train | | freight-train
卡車 goods-van | | goods wagon | | freight car | | truck
貨運辦公室 goods-office | | freight-department
運費率 freight | | freight rates | | goods rate
運費 carriage charges | | shipping expenses | | express charges
車費 cartage | | portage
運費預付 carriage prepaid | | carriage paid
運費到付 carriage forward | | freight collect
運費免除||免費 carriage free
協定運費 conference freight | | freight rate
運費清單 freight account
托運單 way-bill | | invoice
運送契約 contract for carriage
裝運 shipment | | loading
裝上貨輪 to ship | | to load | | to take on a ship
裝運費 shipping charges | | shipping commission
裝運單||載貨單 shipping invoice
裝運單據 shipping documents
大副收據 mate's receipt
裝船單 shipping order
提貨單 delivery order
裝船通知 shipping advice
包裹收據 parcel receipt
準裝貨單 shipping permit
租船契約 charter party
租船人 charterer
程租船||航次租賃 voyage charter
期租船 time charter
允許裝卸時間 lay days | | laying days
工作日 working days
連續天數 running days | | consecutive days
滯期費 demurrage
滯期日數 demurrage days
速遣費 despatch money
空艙費 dead freight
退關 short shipment | | goods short shipped | | goods shut out | | shut-outs
賠償保證書(信托收據)letter of indemnity | | trust receipt
裝載 loading
卸貨 unloading | | discharging | | landing
裝運重量 shipping weight | | in-take-weight
卸貨重量 landing weight
壓艙 ballasting
壓艙貨 in ballast
艙單 manifest
船泊登記證書 ship's certificate of registry
航海日記 ship's log
船員名冊 muster-roll
(船員,乘客)健康證明 bill of health
光票 clean bill
不清潔提單 foul bill
有疑問提單 suspected bill
添加評論
#####
常用短語
Words and Phrases
Inspection Certificate 檢驗證明
Inspection Certificate of Quality 質量檢驗證書
Inspection Certificate of Quantity 數量檢驗證書
surveyor 檢驗行,公證行
Additional Words and Phrases
Inspection Certificate of Weight 重量檢驗證書
Inspection Certificate of Origin 產地檢驗證書
Inspection Certificate of value 價值檢驗證書
Inspection Certificate of Health 健康檢驗證書
Sanitary Inspection Certificate 衛生檢驗證書
Veterinary Inspection Certificate 獸醫檢驗證書
inspection of packing 包裝檢驗
inspection of loading 監裝檢驗
inspection of material 材料檢驗
inspection of risk 被保險物價的檢查
inspection of storage 監裝
inspection of voucher 憑證檢驗
inception of carriage 貨車檢查
inspection of document 單證檢查
inspection of fixed asset 固定資產檢查
inspection of incoming merchandise 到貨驗收
Inspection Certificate on Damaged cargo 驗殘檢驗證書
Inspection Certificate on Tank 驗船證書
Certificate of Measurement & Weight 貨載衡量證書
Authentic Surveyor 公證簽定人
inspection on cleanliness 清潔檢驗
inspection on cleanliness of dry cargo hold 干貨艙清潔檢驗
inspection on cleanliness of tank 油艙清潔檢驗
inspection and acceptance 驗收
inspection before delivery 交貨前檢驗
inspection after construction 施工后檢驗
inspection during construction 在建工程檢驗
inspection between process 工序間檢驗
inspection report 檢驗報告
inspection tag 檢查標簽
Inspectorate General of Customs 海關稽查總局
inspection and certificate fee 檢驗簽證費
to issue(a certificate)發...(證明)
Sworn Measurer 宣誓衡量人
Underwriters Laboratory 保險商實驗室
Loyd's Surveyor 英國勞氏公證行
General Superintendence & Co, Geneva(S.G.S)瑞士日內瓦通用簽定后司
abandonment charge 背棄 費用
absolute par of exchange 絕對 外匯平價
abritrage rate 套匯 匯率
above par 超過 票面 價值
acceptance commission 承兌 手續費
acceptance fee 認付費
acceptance for honor 參加 承兌
acceptance house 期票 承兌行
acceptor for honor 參加 承兌人
accepting bank 承兌 銀行
accepting charge 承兌費
accident beyond control 非人為 事故
account payable 應收帳,應付 未付帳
account purchase 賒買
account receivable 應收 帳款,應收 未收帳
account sales 銷貨帳,銷貨 清單
account of goods sold 銷貨 帳目
account of receipts and payments 收支 帳目
account year 會計
accounting statement 會計 報表
accounting unit 會計 單位
accrued expense 應計 費用
accrued item 應計 項目
accumulation of capital 資本 積累
acknowledgement 回單
acknowledgement of orders 訂單 確認
act of God 天災
acting manager 代理 經理
active demand 暢銷
actual cost 實際 成本
actual liabilities 實際 負債
actual price 實際價
additional expense 追加 費用
additional order 追加 訂貨
additional premium 追加 保費
adjustment of exchange rate 調整 匯價
advalorem duty 從價稅
advance in price 漲價
advance payment 預付款
advance price 增價
advance sample 預樣
advance settlement of exchange 預交 外匯
advance surrender of export exchange 預交 出口 外匯
advice of arrival 到貨 通知
advice of charge 付款 通知書
advice of shipment 貨運 通知
advice of drawing 支票 通知書
advising bank(notifying bank)通知 銀行
advertisement matter 廣告 郵件
advertising agency 廣告社、廣告 代理
advertising expense 廣告費
advertising media 廣告 媒體
affiliated company 附屬 公司,聯盟 公司
after charge 附加 費率
after date 日后,發票后
after sight 見票后 照付
affidavit of export 出口 宣誓書
A grade 甲級(貨品)
against all risks 保全險
agency agreement 代理 協議
agency contract 代理 契約
agent service 代理 服務
agreed upon 同意,商定
agricultural products 農產品
air-borne goods 空運 貨物
air freight 航空 運費
air mail 航空 郵件
air-mail service 航空 運寄
air transportation insurance 空運 保險
all risk 全險
all round price 包括 一切 費用 價格
all sorts of goods in stock 各種 貨物 齊備
allied company 聯營 公司
alongside delivery 船邊 交貨
allowance on sales 銷貨 折口
alter an agreement 變約
amicable allowance 友好 讓價
amicable settlement 友好 解決
amount insured 保險 金額
amount of exports 輸出額
amount of imports 輸入額
analysis certificate 化驗 證書
analysis report 化驗 報告
announcing removal 遷移 通知
annual income 年收入
annual interest 年息,年利
annual production 年產量
annual report 年報,決算書, 財務 報告
anticipated buying 預期 購買
applicant for the credit 信用證 申請人
application fee 申請費
application for conversion 折換 申請書
application for export permit 出口 許可證 申請書
application for import of foreign goods 外貨 進口 報單
application for importation of controlled commodities 管制 貨物 進口申請書
application for letter of credit 開發 信用證 申請書
application for negotiation of draft under letter of credit 出口 押匯 申請書
application for outward remittance for application for space 艙位 申請書
application to pass goods through the custom 報關單
apply by letter 通信 申請
apply in person 親自 申請
apply for a position 申請 職位
apply for information 探詢 消息
apply for remittance 托匯
appointed store 指定 商店
appreciation of money 貨幣 增值
arbitrage of exchange 套匯
arbitration clause 仲裁 條款
arbitration of exchange 匯兌率 裁定
army supplies 軍需品
arrival at port 入港
arrival notice 到達 通知
articles made to order 訂制品
articles of luxury 奢侈品
artificial flower 人造花
as agreed(contracted)按照 合同
as per sample 與 樣品 相同
Asian-dollar market 亞洲 美元 市場
ask the price of 詢價
assignment clause 轉讓 條款
assignment of policy 保險單 轉讓
assistant manager 協理,副經理
as soon as possible shipment 立即 送運
at a discount 折扣
at a premium 超過 票面 之 價值
at a profit 獲利,賺錢
at sight 見票 即付,即期
at the market 照 市價
at par平價
auction price 拍賣價
authority to purchase 購買 委托證
authority to pay 委托 付款證
average cost平均 成本
average tare平均 皮重
average unit cost平均 單位 成本
average unit price平均 單價
average weight平均 重量
award of bid 決標,定標
第四篇:砂輪用語中英文對照
abrasive 砂輪
Al2O3 氧化鋁
balance平衡
bond 結合氧化硼立方晶
buffing wheel 拋光布輪
diamond 鉆石
dresser 砂輪整修機
dressing 修整
endless grinding belt 循環式研磨帶 finishing allowance 加工余量grain 磨粒
grinding disc 研磨盤
jamp up 孔眼堵塞
mesh 網篩目
parameter 參數
resinoid grinding wheel 半樹脂型砂輪 slitting 切縫量
vitrified 陶瓷的wheel 旋轉
第五篇:專業中英文對照
太原理工大學各學院及專業中譯英
【機械工程學院】College of Mechanical Engineering
機械設計制造及其自動化 Mechanical engineering and automation
1.機械制造及其自動化 Mechanical Manufacturing and its Automation
2.機械設計及理論 Mechanical Design and Theory
3.機械電子工程 Machinery Electronics Engineering
4.車輛工程 Vehicle Engineering
工業設計 Industrial Design
機械系 Department of Mechanical Engineering
機械制造工藝及設備Machinery manufacturing process and equipment
【材料科學與工程學院】College of Materials science and Engineering 從材料成型機控制工程 Material Shaping and Control Engineering 金屬材料工程 Metallic Materials Engineering
無機非金屬材料工程 Inorganic Nonmetallic Materials Engineering 冶金工程 Metallurgical Engineering
高分子材料與工程 Polymer Materials and Engineering 材料物理 Materials Physics
材料化學 Chemistry of Materials
1.材料物理與化學 Materials Physics and Chemistry
2.材料科學與工程 Materials Science and Engineering
3.材料加工工程 Materials Processing Engineering
4.鋼鐵冶金 Iron and Steel Metallurgy
5.有色金屬冶金 Nonferrous Metallurgy
【電氣與動力工程學院】 College of Electrical and Power engineering 電氣工程及其自動化 Electrical engineering and automation 熱能與動力工程 Thermal Energy and Power Engineering 培養方向:
1.熱動力工程 Thermo power Engineering
2.動力機械及工程 Power Machinery and Engineering
3.電機與電器 Electrical Machinery and Appliances
4.電力系統及其自動化 Electrical System and its Automation
5.高壓電絕緣技術 High-Voltage Electricity an Insulation Technology
6.電氣,電子和傳動裝置 Electrical, Electronics and Transmission
7.電工理論與新技術 Theory and New Technology of Electrical Engineering
【信息工程學院】 College of Information Engineering
自動化 Automation
培養方向:電路系統 Electric Circuit an System
電子信息工程 Electronic and Information Engineering
測控技術與儀器Measurement control technology and instruments
培養方向:
1.檢測技術與自動化設備 Detecting Technology and Automatic Equipment
2.系統工程 Systems Engineering
3.模式識別與智能系統 Pattern Recognition and Intellectual System
通訊工程 Communication Engineering
培養方向:
1.通信與信息系統 Communication and Information System
2.信號與信息處理 Signal and Information Processing
電子科學與技術 Electronic Science and technology
培養方向:控制理論與控制工程 Control Theory and Control Engineering
【計算機科學與技術學院】 College of Computer Engineering and Software
計算機科學與技術Computer science and technology
物聯網工程 Networking Engineering
【軟件學院】 College of software
軟件工程 Software engineering
【建筑與土木工程學院】College of Architecture and Civil engineering
建筑學 Architecture
城市規劃 City Planning
土木工程 Civil Engineering
【水利科學與工程學院】 College of Water Conservancy Science and Engineering
水利水電工程 Water Conservancy and Hydroelectric Engineering
農業水利工程(含水利信息化方向)Agricultural Water Conservancy Engineering
水文與水資源工程 Hydrology and Water Resources Engineering
Agricultural Soil and Water Engineering
Hydrology and Water Resources
Hydraulics and River Dynamics
Water Engineering and Structural Engineering
Water Conservancy and Hydroelectric Engineering
Harbor Beach and Inshore Engineering
【化學化工學院】 College of Chemistry and Chemical Engineering
化學工程與工藝Chemical Engineering and Technology
(化學工藝、能源化工、精細化工、高分子化工方向)Chemical engineering and technology(Chemical process、Chemical energy、Fine chemical、Polymer chemistry)
應用化學 Applied Chemistry
生物工程 Biological Engineering
制藥工程(化學與生物制藥工程方向)Pharmaceutical Engineering
過程裝備與控制工程 Process Equipment and Control Engineering
化學和生物制藥工程方向 Chemical and biological pharmaceutical engineering direction
【礦業工程學院】 College of mining engineering
采礦工程 Mining engineering
安全工程 Safety engineering
資源勘查工程 Resource exploration engineering
測繪工程 Engineering of Surveying and mapping
地理信息系統工程 Geographical information system engineering
礦物加工工程Mineral processing engineering
城市地下空間工程 City Underground Space Engineering
勘查技術與工程 Prospecting technology and Engineering
【輕紡工程與美術學院】College of Textile Engineering with Academy of Fine Arts 紡織工程 Textile Engineering
服裝設計與工程 Clothing design and Engineering
藝術設計Artistic Design
繪畫 Painting(Drawing)
攝影 Photography
動畫 The animation
電子商務 Electronic Business
數字媒體藝術 Digital media art
文化產業管理 Cultural industry management
【環境科學與工程學院】 College of Environmental Science and Engineering 給水排水工程 Water supply and drainage engineering
環境工程 Environmental Engineering
建筑環境與設備工程 Constructing Environment and Equipment Engineering
【數學學院】 College of Mathematics
數學與應用數學 Mathematics and Applied Mathematics
信息與計算科學 Information and Computing Science
統計學 Statistics
【物理與光電工程學院】 College of Physics and Photo electricity Engineering光信息科學與技術Optical information science and technology
應用物理 Applied Physics
光源與照明 Light source and lighting
【力學學院】 College of Mechanics
工程力學 Engineering Mechanics
【外國語學院】 College of foreign languages
英語 English
【政法學院】 College of politics and law
法學 Law
行政管理 Administrative management
思想政治教育 Ideological and Political Education
【經濟管理學院】 College of Economics and management 市場營銷 Marketing and sales
工程管理 Project management
會計學 Accounting
國際經濟與貿易 International Economics and trade 物流管理 Logistics management
【體育學院】 College of Physical Education
體育教育 Physical education