第一篇：在國外怎么用英語叫出租車？（最終版）

英語最前線

深圳龍華成校

在國外怎么用英語叫出租車？

你知道怎么用英語叫出租車嗎？你知道怎么讓酒店服務生幫忙叫車嗎？不知道的快來惡補一下！

第一件事...首先想想您該如何開始您的請求：

問候

“Hello”你好

“Good morning”早上好 “Good afternoon”下午好 “Good evening”晚上好

打電話叫出租車

“May I have a taxi at??”我可以在...叫輛出租車嗎？

“Could you send a taxi to??”您能安排一輛出租車到...嗎？ “I’d like to order a taxi?”我想預定一輛出租車...“Could I book a taxi??”我能訂輛出租車...嗎？

“I’d like a taxi immediately/as soon as possible please.”我想馬上叫輛出租車。

檢查出租車在哪兒

您的出租車沒有準時出現，所以您需要知道具體原因：

“Hello, my name is Mr.Smith.I ordered a taxi for 8p.m.at XYZ Street.It’s 8:15 now.Could you check what has happened please?”您好，我是史密斯先生。我訂了輛出租車晚上8點到XYZ街。現在是晚上8：15了。您能幫我查一下出了什么問題嗎？

“Can you make sure one arrives as soon as possible?”您能確保一輛車馬上就到嗎？

在賓館

您正在賓館，想讓賓館的員工幫您安排輛出租車，您詢問前臺：

“Could you organize a taxi for me for this evening please? I need to be picked up at 7p.m to go out for a business dinner.”您今晚能幫我安排一輛出租車嗎？我想晚上7點出發去赴宴。

“Could you book a taxi to take me to the train station tomorrow morning please? I need to be at the station at 8:30a.m.What time do you think should I leave?”您能幫我訂輛出租車明早上送我到火車站嗎？我早上8：30需趕到。您覺得我什么時候離開比較好？

您詢問門衛

“Excuse me, could you hail a taxi for me please?”打擾一下，您能幫我叫輛出租車嗎？

“Excuse me, I need a taxi please.”打擾一下，我現在需要叫輛出租車。

“Excuse me, could you get a taxi for me please?”打擾一下，您能幫我叫輛出租車嗎？

英語最前線

深圳龍華成校

您想提前知道坐出租車大概要多少錢

“How much is the typical taxi fare to the airport/train station/city centre etc?”坐出租車到機場/火車站/市中心...大概需要多少錢呢？ 在出租車內

您需要告訴司機您想去哪兒：

“Could you take me to ‘The Irish Pub’ on 123 XYZ Street please?” 您能送我到123 XYZ街的‘The Irish Pub’嗎？

您需要告訴司機您很著急：

“I’m really in a hurry, so can you take the quickest route please?”我實在是很趕時間，您能盡量開最快的速度嗎？

在美國，有一個非正式的短語意思是讓司機開快點： “Please step on it!”請開快點！

您不確定您是否在正確的地點：

“Are you sure this is 123 XYZ Street? I can’t see ‘The Irish Pub’.”您確定這是123 XYZ街嗎？我看不到‘The Irish Pub’。

您想知道該付多少錢：

“How much is the fare please?”請問多少錢？ “How much do I owe you?”我該付您多少錢？

您覺得服務很好，想給出租車司機一點小費： “Keep the change.”不用找零了。

然后，如果司機感謝您：

“You’re welcome.”不客氣。

第二篇：修井工在國外(修井英語教程)

1、Good evening ,I don’t believe we have met before, let me introduce myself ,I’am Chen

晚上好，我們以前沒見過面，我自我介紹一下，我的名字叫陳一明。

2、I come from china 我來自中國。

3、Customs 海關

4、Where is the customs 海關在哪里？

5、Is the customs examination here? 海關檢查是在這嗎？

6、Please show me your passport.請把你的護照給我看看。

7、Here you are 給你

8、Anything to declare？ 你有什么要申報的嗎？

9、Have you got any suitcase? 你帶手提箱了嗎？

10、Would you mind opening the case ? Right that’s all 請打開皮箱。好了檢查完畢了。

11、Passport and embarkation card please.請拿出護照及入境證。

12、Is your visit on business or pleasure? 你是經商還是旅游？

13、How long will you staying? 你要停留多長時間？

14、About four months 四個月左右

15、What your purpose of your visit ?你旅行的目的是什么？

16、On business 因公

17、What’s inside this package 這包里是什么？

18、Got any cigarettes or Spirits /wine?你有香煙和酒嗎？

19、Good noon, sir could I have your passport and ticket please?午安，先生請將護照和機票給我好嗎？

20、Your seat is 26C,boarding time is twenty minutes before departure and you will board at gate 18.Have a nice flight.你的座位是26C，登機時間是起飛前20分鐘，在18號門登機。祝你旅途愉快！

21、Can you tell me the cost of the room?請把房間費用告訴我?

22、How much do you charge for one per day 一間房子每天多少錢？

23、Excuse me could you show me the way to the post office? 請問能不能告訴我到郵局怎么走？

24、How can I get to the railway station?我怎樣到火車站？

25、Hello！This is the company.喂，這是修井公司。

26、Is Mr.Eton in ,please? 請問伊頓先生在不在？

27、I said the meeting has been changed to half-past two.Can you hear me ? 我說會議改到兩點半你聽清楚了嗎？

28、I see ,is there anything else? 明白了，還有其他事嗎？

29、What’s the time now ?現在幾點了？ 30、It’s four twenty 現在是四點二十。

31、May I trouble you to tell me the time ?麻煩你可以告訴我現在幾點嗎？

32、What’s the date today?今天是幾號？

33、What day is today ?今天是星期幾？

34、What’s the weather today? 今天天氣怎么樣？

35、What’s the temperature today? 今天氣溫多少度？

36、He works as a driller in this crew他在這個隊當司鉆。

37、He is the most able engineer of the Second Drilling Company.他是鉆井二公司最有能力的工程師。

38、We get everything in order before we leave the location.在我們離開井場之前，把一切都收拾好。

39、It’s number eighty-five of petrol(gasoline).它用85號汽油。

40、are used for raising and lower the pipes.絞車用來上提或下放鉆具。

41、Now circulate, please!現在請循環泥漿！

42、Through this high pressure line, the mud is pumped into the stand pipe and drill pipe.通過這根高壓管線，泥漿被泵抽入立管和鉆桿。

43、If the pressure should be too high, the pump liners would crack or break into pieces.萬一壓力太大，泵的缸套就會破碎。

44、It would be better to reverse circulation in this case.在這種情況下，用反循環會好些。

45、Make up a joint, please!請接一個單根！

46、Break down a joint, please!請卸一個單根

47、Please pull out of hole and change bottom hole assembly(BHA)!請起鉆，換下部鉆具結構！

48、First of all, slug pipe, and then trip out of hole, please!請往鉆桿里打點重泥漿，然后起鉆！

49、Make it up one more thread, please!請再上一扣！50、Carry out drilling operation in accordance with the drilling program.按鉆井程序進行鉆井作業。

51、That’s a little more than I wanted to pay.Don’t you have any less expensive shirts 有點貴，有沒有便宜一些的襯衣。

52、Much better.how much are they? 好多了，多少錢一雙？

53、what’s size do you want ? 你穿多大號的？

54、try this and see how it feels? 試試這一雙，看怎么樣？

55、well what’s troubling you ?哪里不舒服？

56、Now ,let me have a look ,it is bit high.now, I want to examine your throat.open wide say“Ah”現在讓我看看（溫度）有點高，現在想看看你的喉嚨。張開嘴說“Ah”

57、have a good rest and get plenty of sleep.You will be all right soon.here’s a prescription for some medicine.take it every two hours so that you won’t cough.好好休息，睡好覺。你很快就會康復。這是藥方，沒兩小時吃一次，就不咳嗽。

58、how many people are there in your family.你家有幾口人？

59、five，besides my parents and me ,there’s my brother and my sister.五口人。除父母和我以外，還有一個兄弟和一個妹。60、so , tell me about your family.have you got any brothers or sisters?談一下你家庭情況，你有幾個兄弟姐妹？

61、Are you married? 你結婚了嗎？

62、Oh ,I’ been married for several years。啊，我結婚幾年了？

63、How many crews are there in your company? 你們公司有多少個作業隊？ 64、How many employees are there in your company? 你們公司有多少雇員？

65、which main equipment are there in your company? 你們公司有哪些主要設備？ 66、Which services can your company provide?你們公司能進行哪些作業？ 67、where does your company conduct the downhole operations? 你們公司在哪些地方進行井下作業？

68、how many division are there in your company?你們公司分幾個部？ 69、how many people are there in a crew? 鉆井隊有多少人？ 70、which people may a shift include? 鉆井班包括哪些人？

71、what does the driller do ?司鉆干什么工作？In charge of / responsible 72、what is the responsible for ? 井架工負責什么？

73、what are the principal functions of bit? 鉆頭的主要作用是什么？ 74、what is meant by making a connection? 接單根指的是什么？ 75、what is kick off point ? 造斜點的深度是多少？

76、why must a round trip be performed? 為什么必須起下鉆？

77、how many types are there in well completion?完井方式有幾種類型？

78、what is a wildcat well ?什么是野貓井？Exploration well 探井 production well 生產井injection well注水井

79、how about the completion method? 完井方法怎么樣？Completion well 完井

80、Are you able to keep the sides form caving in by mud?你們能用泥漿保持井壁不坍塌嗎？ 81、when this happens ,one section of pipe will be lost in hole.這種情況一旦發生，一段鉆桿就掉在井里。

Yes.we refer to it as a “fish”.是的，我們把它稱為落魚。so you have to get the “fish” out.這樣，你們必須把落魚撈出。yes.we do.是的，我們必須把落魚撈出。

82、how much will it cost if a well has such a problem?如果一口井出現這類問題，要花多少錢？

The mud cost could run into hundreds of thousands of dollars。泥漿費可能達幾十萬美元。83、when was the oilfield discovered?這個油田是什么時候發現的？In 1982.84、which type of oil reservoir is it?是什么類型的油藏？ 85、It is water-drive reservoir.是水驅油藏。

86、This is the structure map we have worked out.這是我們繪制出的油田構造圖。87、How nice the structure is!is it a nose structure.多好的構造，是鼻裝構造嗎？ 88、No ,it ’t.it is an anticline.不，不是，它是背斜構造。89、Is it a normal fault?這是條正斷層嗎？ 90、No ,this is not a normal fault,but a thrust one.不，這不是一條正斷層，而是一條逆掩斷層。91、How big is this basin area?這個盆地面積有多大？

92、This basin area covers more than twenty thousand square kilometer.這個盆地面積有兩萬多平方公里。

93、We now know you can produce more oil.what measures have you taken?我知道你們可以采出更多的石油。你么采取什么方法（措施）？

94、We employed the secondary recovery,that is ,water-flooding.In this way,the oil and water arew produced together,and then separated at the surface.我們采用二次采油，即注水。用這種方法又和誰一起采出來，在地面進行油水分離。

95、What’s the spacing between two wells?井距是多少？

96、Generally speaking,a well is drilled on 40-acre spacing.一般來說，井距是40英畝。97、What is the area of your oilfield in square miles?你們油田是多少平方英里？

98、About 60 square miles.that’s near 155 square kilometer.約60平方英里，約155平方公里。99、What is the average yield of the individual well in your field?你們油田平均單井產量是多少？

100、It is approximately 15 barrels of oil per day.每天約15桶油。

101、How many wells are there in this block？這個區塊有多少口油井。Fifty wells.有五十口井。

102、How did you produce oil in the well? 這口井怎么采油？ At the very beginning ,oil and gas flowed out that way.在初期，油氣自噴。

103、Is the oil and gas flowing all the way through?油氣一直自噴嗎？No,it gradually stopped flowing out that way.不，油氣逐漸停止自噴。

104、So you began pumping it,right?這樣，你們就開始抽油了,對么？Right,we installed a pumping unit at the surface.是的，我們在地面安裝了抽油裝置。

105、Has this well produced only oil all the time?這口井一直只生產原油么？No,After several months,it started producing some water along with the oil.不，幾個月后，開始生產油和鹽水。106、What’s the size of the block?這個區塊有多大？

107、The oil bearing reservoir is 20 square kilometers.含油面積是20平方公里。108、What’s the average yield per well?每口井的平均產量是多少？

109、It’s about 10 tons per day,which is equivalent to 70 barrels.The total output is 2500 barrels per day.每天約10噸，相當于70桶。每天總產量2500桶。

110、How long has the yield been sustained ?該產量穩定多長時間？The yield had been sustained for 10years.這個產量穩定10年。

111、Is any perforator truck on the wellsite? 射孔車在井場嗎？Yes ,there is one perforator truck.是的，一臺射孔車在井場。

112、When dose perforating operation begin?什么時候開始射孔？Let’s start at once.讓我們馬上開始吧。

113、What are well pullers doing? 修井工正在干什么？They are assembling the perforating gun.他們在組裝射孔槍。

114、What’s the length of the perforating gun ?射孔槍的長度是多少？The length of the perforating gun is about 10 meters.射孔槍約10米長。

115、Where is the technican of the crew?這個隊的技術員在哪？ He is on the wellsite.他在井場上。

116、Let him introduce the parameter of this well?讓他介紹一下這口井的參數好嗎？The prodution casing size is 5-1/2inch,reservoir depth is 2500meters,reservoir static pressure is 26 Mpa.油層套管尺寸是5 1/2in，油層深度是2500m，油層靜壓是26Mpa.117、What is the perforated interval? 射孔井段是多少？The perforated interval is 2450-2610meters.射孔井段是2450-2610米。

118、What is probably the most important in all completion sequence for cased holes?套管井的所有完井工序中，什么是最重要的？Perforating is probably the most important.射孔可能是最重要的。

119、What function does perforating perform?射孔的功能是什么？ Perforating performs adequate communication between the wellbore and all desired zones.射孔實現井筒與預期的全部產層間的充分溝通。

120、What types are perforating guns divided into?射孔槍有哪些類型？Perforators are divided into bullet perforator,jet perforator,and hydraulic perforator.射孔槍分子彈射孔槍，聚能噴流射孔槍及水力噴射射孔槍。

121、Do you know how to operate the perforating gun?你會操作這種射孔槍嗎？having been trained in a factory ,we knoe hoe to operate the perforating gun.我們在一家工廠受過培訓，所以我們知道怎樣操作這種射孔槍。

122、Do you know what the muzzle velocity of bullet guns is ?你知道子彈射孔槍的槍口速度是多少嗎?about 3300 ft/s.槍口速度約為3300ft/s.123、What is the shot density（稠密度）of the well? 這口井的射孔密度是多少？

124、The density is10 shots per meter？ 射孔密度為10孔/米。

125、What is the penetration of jet perforators? 聚能射孔槍的穿透能力是多少？

The penetration of jet perforators is 9 in(英寸)feet（英尺）.126、Could you explain the jet perforating process? 你能解釋一下穿透器的穿透機理嗎？

127、Did you use through-tubing jet perforator? 你們使用過“過油管射孔槍”嗎？

128、we have been using the through-tubing jet perforator for completing.我們一直用“過油管”射孔槍完井。

129、What are the advantages of through-tubing jet perforator? 過油管射孔槍的優點有哪些？

130、Many of the through-tubing guns give inadequate penetration and hole size.很多過油管射孔槍給出了不恰當的穿透能力和孔眼尺寸（hole size）。131、What malfunction can any fault in the system result in? 系統中的任何缺點可能產生什么故障？

132、This can result in an irregular or inadequate hole size, poor penetration , or no hole at all.其結果可能造成孔眼紊亂或者孔眼大小不適，低滲透率和射孔不完全。133、What is the name of this equipment? 這部設備的名稱是什么？

134、It is jet（噴射）perforator.它叫聚能射孔槍。

135、How long will it take to make a trip? 起下一次管柱需要多長時間？

136、what tool do you use in perforating? 你們使用什么工具進行射孔？ 137、what had happened？ 發生什么事了？

138、A big crowd(一大群人)gathered（聚集）around the perforating truck（射孔車）, almost blocking up（阻塞）the traffic.一大群人聚集在射孔車周圍，幾乎把交通給整癱瘓了。139、How long will it take to finish running in hole the perforator? 下射孔槍需要多長時間？

140、We intend to finish operating in two hours.我們計劃在2小時內完成。141、Are you ready？ 你準備好了嗎？ Yes，we are.是的，都準備好了。

142、when do you have the operating meeting? 你們什么時候開生產會？

143、If supervisor comes here in the afternoon, we shall hold operating meeting with him.如果監督下午來了，咱就跟他一起開個會。Countdown 144、What time are you going to run in hole（下鉆）the perforator?

POOH 起鉆 pull out of hole

什么時候下射孔槍？

At 8 o’clock。

146、what measures do you take to insure good job performance [ p?f?:m?ns] and a safe job? 你們采取什么措施保障工作安全有序？Take sth to do sth 147、Procedures[pr?si:d?z]

for loading，running，and firing the gun must be carefully followed to insure good job performance and a safe job。

裝料程序、射孔槍下井以及引爆均需小心地進行以確保射孔工作安全有序。148、What is an ideal（理想的）fluid=liquid（液體）for perforating? 射孔用的理想壓井液是什么？

149、It refers to(適用于)a clean solid-free(無固相)fluid with a differential pressure（壓力）in the wellbore（井眼）?

在井筒中具有壓力差的干凈無固相的壓井液。

150、Is any lubricator(潤滑物)used in process of perforation? 在射孔過程中使用什么防噴管嗎？ One approach（方法、途徑）requires the use of a large diameter(直徑)lubricator on the well head.通用的方法要求在井口使用大直徑防噴管

151、what method is the required（要求）differential（壓差、差別）obtained by? 用什么方法達到所要求的壓差？

Required differential is usually obtained by(獲得)partially（一部分）or completely（完全的）filling the casing with saltwater（鹽水）,fresh water（純水）,or oil.一般是使用鹽水、淡水或者原油部分或全部充滿套管來達到所要求的壓差。152、What kind of perforator do you think we should better use? 你認為我們最好使用哪種射孔槍？ You’d better use the jet perforator.我認為你們最好使用聚能式噴流射孔槍。

153、when operating near the upper temperature limit of low temperature charges,what approaches（方法、近似）may be used? 在接近低溫炸藥的上限操作時，應使用什么方法？ The following approaches can be used: A.Well can be circulated(循環)with low temperature fluid to lower the bottomhole（井底）and surrounding formation（構成）temperature.可以使用低溫流體循環洗井至較低的井底及周邊溫度。

B.High temperature detonator(引爆裝置)may be employed in guns equipped with conventional（習慣的，常用的）low temperature cyclonite charges（射孔彈）.可以在使用低溫炸藥裝備的射孔槍中采用高溫雷管。154、what conditions can normal（正常）=abnormal(不正常)pressure oil well be perforated with? 常壓油井什么條件下可以射孔？

Normal pressure oil well can be perforated with oil or water in the hole with through-tubing guns(過油管射孔槍)using conventional wellhead control.正常壓力的油井，可以在井筒中充滿原油或水，使用過油管射孔槍射孔，射孔時采用普通井口控制裝置。

155、how are gas wells and high pressure oil wells perforated? 怎樣對氣井和高壓油井進行射孔？

A grease(油脂)seal（密封）lubricator（防噴管）should be used on all gas wells,and oil wells with surface pressures anticipated（預期）to be greater than 1000 psi after perforating.在所有氣井以及預期射孔后井口壓力大于1000psi 的油井上，都應該使用潤滑脂密封防噴管。

156、which type of completion is the most prevailing(主要，普遍)method of finishing a well? 完井中最常見的完井方法是什么？

The perforated casing type of completion is by far(迄今為止)the most popular method.目前最常見的完井方法是套管射孔完井。

157、what advantages(優點、好處)does the perforated casing completion have? 套管射孔完井有什么優點？

The perforated casing completion is the most economical(經濟的合算的)and offers the best chance for subsequent（后來的）workovers（修井）or stimulation（激發）treatment（處理）.套管射孔完井是最經濟的方法，并且為后來的作業和增產措施提供最優的條件。158、when was bullet（子彈）perforator developed（發展）? 子彈射孔槍是什么時候開始研制出來的？

It was developed in 1932 and has been in continuous（連續性的）and widespread（廣泛傳播）use since then.它在1932年被研制出來并被廣泛應用。

159、Please explain the principle(原理、原則)of bullet perforator opertaion? 請你解釋一下子彈射孔槍的作用機理？

The bullet perforator is a multi(多級)-barrel（桶狀）{barrier柵欄}gun designed to be lowered into a well, positioned at the desired（渴望的）interval（間隔）and fired electrically（用電的）from surface controls.子彈射孔槍是一種專供下井用的多炮管槍，它下到預定位置后，有地面控制裝置進行電點火。160、Do you know the perforating procedure(步驟)? 你知道射孔步驟嗎？

Does he agree to the perforating plan? 他同意這個射孔方案嗎？ He disagrees to the perforating plan.他不同意這個射孔方案.161、how do things stand（保持看法）

at the moment? 目前情況怎么樣？ All goes well.萬事順利

162、when is the perforating operation finished? 射孔工序什么時候結束？ at about 3 o’clock.大概3點鐘。PM=post meridiem下午 A.M=ante（meridiem=中午）163、what do we do next? 我們下一步的工作是什么呢？ Pull the perforator out of hole.起出射孔槍。

164、which one is moved in to perform(表演=play)the next work? 采用哪種設備進行下一步工作？

A service(1.服務2.檢修)rig(well service unit)is moved in to perforate, run tubing, and prepare for pumping the well.利用修井機來進行射孔、下油管、做油井抽油準備。

六、地面設備及安裝

165、Do you use a drilling rig or a workover rig for completion and workover operations? 你使用鉆機或者修井機進行完井或井下作業嗎？

On the new conventional wells, a drilling rig is released（放架子）and operations are completed with a workover rig.在新的常規油井中不用鉆機，而用修井機。166、what types are workover rigs divided into? 修井機分為幾類？

Two types：tractor hoist（升降機）and truck mounted(車載)rig.兩種類型：履帶式作業機和輪式車載作業機。167、who operates the workover rig? 誰操作修井機？

Driller operates the workover rig.司鉆操作修井機。

168、what functions(功能，作用)does a workover rig have? 修井機有哪些功能呢？

One of the main functions is pulling and running the string（管串）.它的一項主要功能是起下管柱。

169、Does driller know the main characteristic（特性）parameters(因素，參數)of the workover rigs? 司鉆知道修井做業機的主要特性參數嗎？ What characteristic parameter does this oil well have? 170、what is the engine（發動機）power? 發動機功率是多少？

The engine power is 268kw.=kilowatt 171、where is the workover rig made? 修井機是哪里制造的？ The workover rig is made in china.172、what is its weight? 它的重量是多少？ Totally 55t=ton。總共55噸。

173、how does the engine work? 發動機運轉的怎么樣？

The engine normally works all the time.發動機一直運轉正常。

174、why did this engine suddenly stop? 為何發動機發生突停？

There is the trouble with high pressure fuel pump.高壓油泵出了問題。

175、what does rig capacity mean? 作業機的承載能力指的是什么？

Rig capacities are commonly spoken of in term of（依據，由于）depth rating with a particular(特別的)size tubing,usually 2 7/8 in.（two and seven over eight）176、what is the maximun lifting speed of the workover rig ? 修井機的最大提升速度是多少？

The maximun lifting speed of the workover rig is one meter per second.修井機的最大提升速度為每秒1米。

177、which parts do the truckmounted(輪式車載)rigs consist of? 車裝修井機有哪些部分組成？

The truckmounted rig mainly consist of a self-propelled（自推進）chassis（底盤）,a mast（井架）, a water circulating（循環）system,hydraulic（液壓）system,an angle（角度）drive,a winch（絞車）,a water brake（剎車）,a brake cooling unit,a rotary table drive, and a drller’s console（操作臺）.車裝修井機主要由自走底盤、井架、水循環系統、液壓系統、角傳動裝置、絞車裝置、水剎車、剎車冷卻系統、轉盤傳動裝置及司鉆操作臺組成。

178、Do you know what the maximun static(靜止)load of the mast=derrick（井架）is ? 你知道井架的最大靜載荷是多少嗎？ The maximun static load of mast is 600KN.井架的最大靜載荷是600千牛。

179、what are the dimensions of the drum? 滾筒的規格是多少？

Its diameter（直徑）is 345mm and the length is 696mm.Parameter(參數)它的直徑是345毫米，長為696毫米。

180、please tell me the dimensions of the brake drum? 請告訴我剎車滾筒的規格尺寸。

The diameter of brake drum is 970mm, its length is 210mm.剎車滾筒的直徑是970毫米，長度210毫米。

181、what is the maximun tension（拉力）of the fast line? 快繩的最大拉力是什么? The maximun tension of fast line is 114KN。快繩的最大拉力是114KN.182、what features（特征、特點）have the workover rigs? 修井作業機有什么特點？

The workover rig has the following features.修井作業機有以下幾項特點。

A.special chassis driven by front and rear（后部）axles(輪軸).專用底盤，前后橋驅動。

B.both workover unit and self-propelled carrier use one engine with high power efficiency.修井裝置與自走式底盤共用一臺發動機，發動機效率高。

C.allison（姓氏，阿里遜）hydraulic transmission（傳動）features flexible（靈活的）and stepless(無級的)shift(換擋、倒班),the gear（齒輪）is shifted automatically when travelling and by manually(手動，人工的)air control when service.Rear（后面的，后置的，front 的反義詞）tear（眼淚，撕裂）gear（齒輪）

阿里遜液壓傳動箱柔性傳送無級變速，井口對正好，車輛行駛時自動換擋，修井時人工氣控換擋。

D.winch drum reels(vt纏，卷)and arranges（分類安排）wireline（鋼纜、測井電纜）without any special apparatus（儀器，器械）.絞車滾筒無需排繩裝置、自動纏繩、排繩。

183、which factors（因素）does rig capacity（性能，容量）depend on? 鉆機的性能取決于什么因素？

Rig capacity depends upon a number of factors , principally（重要的，首要的）,braking capacity, derrick=mast（井架）capacity,and drawworks=winch（絞車）horsepower.作業機的性能取決于很多因素，主要有：制動能力，井架承載能力和絞車功率。184、what is the prime（首要的，主要的）consideration for rig selection? 選擇作業機的主要因素是什么？

Braking capacity is the prime consideration for rig selection.制動性能是鉆機選擇的主要考慮因素。

185、what fuel（燃料）does the engine consume（消耗）？ 發動機主要消耗什么燃料？ The engine consume diesel.發動機主要使用柴油。

Kerosene煤油 gasoline汽油 diesel 柴油 crude oil 原油engine oil 機油 gear oil 齒輪油

Hydraulic fluid 液壓油 grease 潤滑脂 thread compound絲扣油

drive oil傳動油aircraft fluid航空液壓油 brake fluid 制動液

186、how much fuel does this engine consume every day? 發動機每天消耗多少燃料？

On an average,the engine consumes 100 liters every day.Arrange 分類安排 average平均 orange桔子 每天平均消耗100升。

187、why is unusual noise（噪音）heard in operation of the engine? Normal正常 abnormal不正常 usual正常 unusual不正常 為什么發動機的運轉聲音不正常呢？ Because there is a trouble with the engine.因為發動機有故障了。Trouble=fault故障 188、when will the engine be started? 發動機何時啟動？

The engine will be starting to run in half an hour.發動機半小時后將被啟動。

7/8 seven over eight 1/2 one over two 189、need we start the engine now? 需要我們現在啟動發動機嗎？

Yes，now the engine needs starting to get warm 是的，我們需要啟動發動機來進行暖車。190、why has the equipment stopped? 為什么設備熄火了？

Because the equipment has been out of use.因為設備已經報廢了。Be out of use(超過使用壽命了)191、does the new machine work better than that old one? 那臺新機器比舊的那臺運行好嗎？

The new machine is not any better than that one.新的不比舊的好。

192、how do you solve the problem? Solution ,n.解決

solve.vt 解決 你怎么樣解決那個問題？

New machine will be used to replace（替代）the old ones.將用新機器替代舊機器。

193、what can i do today?

我今天能做點什么呢？

You should repair the power equipment in time.你應該及時把動力設備修好。In time 及時 on time 按時 194、when was the workover rig put into(投入)operation? 這臺修井機何時投入運行？

The workover rig was put into operation last year.這臺修井機去年投入運行的。195、who operates this new machine? 誰操作這臺新機器？

They will let you operate this new machine on condition that you follow the operation rules(規則).在你遵守操作規則的條件下，我們將允許你操作機器。196、has the equipment been lubricated? Lubricator 防噴管 lubricate 潤滑 設備進行潤滑保養了嗎？

The equipment has been well lubricated.設備已經潤滑保養得很好了。

197、how fast does the truckmounted rig travel? 車載鉆機能跑多快？

It travels on the road at speed 50km/h.在公路上可以飆到50公里/小時。

It travels on the road at speed of tortoise(烏龜)

198、when do you intend to use the air compressor(壓縮機)? Compress vt 壓縮 compressor 壓縮機 press 按住，壓 pressure 壓力 pull拉 push推 你準備什么時候使用空氣壓縮機？ Do will the air compressor have been repaired before the end of the month, otherwise we won’t be able to get to work on time.Otherwise 否則，不然，可做連詞

空壓機必須在月底之前被修好，否則我們將不能按時開工。199、how do you maintain(保養，維持)the lubricating system? 潤滑系統如何保養？

We inspect（檢查）the lubricating system periodically(定期地，周期地).Inspect 檢查 insect 昆蟲 我們定期對保養系統進行檢查。200、can you operate the equipment? 你能操作這臺設備嗎？

Yes，such equipment is easy to operate.是的，這個設備操作很簡單。201、how does the pump run? 這臺泵運轉如何？

This pump has been running very well for three months.這三個月以來，泵運轉的非常好。202、where does the workover rig park? 修井機停那？

The workover rig parks in front of（在....前方）the well head.修井機泊在井口前面。

In the front of 在...的前部，前者屬于后者內部范圍內 In front of 在...的前部，前者不屬于后者范圍內 Table is in the front of room.trees are in front of the room.203、how many pieces(件)of equipment are there on this well site（井場）? 這個井場有多少設備？ Five sets.5臺.204、what are they? 它們是什么？

One workover rig , two truckmounted boilers,two cementing trucks.Boil煮沸 boiler 鍋爐，燒水壺 205、Is there any tanker on the well site? 井場是不是有罐車？

The tanker is on its way to the well site.罐車正在回井場的路上。

206、how many square meters does the well site take? 井場占地多少平方米? Stere立方米

The well site takes 2500 square meters.井場占地2500平米。

207、would you mind moving your car? 你介意挪動你的車嗎？ That’s all right。沒事兒，好說。

208、where do you want to go? 你想去哪？

I want to go to the well site.Go home、here、there.其余必須使用go to +名詞 我想去井上看看。

209、when will the fracturing truck be here? Tear 眼淚、撕裂 fracture 破裂 rear 在..后面 gear 齒輪 Factory工廠barrel水桶 barrier柵欄 battery電池

Please wait for moment,the fracturing truck will be here in a minute.(立即，馬上)請稍候，壓裂車稍后即到。

210、time’s rather pressing,please drive faster.時間緊，開快點。

Please be at ease（放松）,I’m sure we will arrive（go）there on time.放松，我敢打保票，準點到。

211、how many kilometers does this truck make per hour? 卡車的時速是多少？

This truck makes 70 kilometers an hour.卡車時速70公里/小時.2013.1.17 8：00-11:00

212、how many pieces of equipment are there on the well site? 井上有多少臺設備？

A crane（起重機=derrick）,and a dozer（推土機）.井上有一臺吊車，一臺推土機。

Boiler鍋爐車 cementing truck 水泥車 truckmounted rig 車載鉆機

213、are there any big tanks on the well site? 井上有大罐嗎？

There are five big tanks on the well site.井上有五個大罐。

214、what is the volume(體積)of this tank? 這個罐的體積有多大？

The volume of this tank is 40 stere(立方米)。

這個罐的體積為40立方米。Stere 立方米 square meters平方米

215、will you please measure(測量)the height（高度）of the tank? 請你測量一下罐的高度？

The height of the tank is about 5 meters.罐的高度約為5米。

216、what are you going to do? 你將要去做點啥？

We are going to load the truck with tongs（大鉗）,slips（卡瓦）and elevators（吊卡）.Tubing elevator油管吊卡 pipe elevator鉆桿吊卡 我們將把大鉗、卡瓦和吊卡裝上車。

217、where does the spanner(扳手)go? Hammer榔頭 spanner 扳手screwdriver螺絲刀 扳手放哪了？

The spanner goes on the bottom shelf.扳手放在架子的底部了。

218、how are things going? 事兒怎么樣了？ All things went well。一切順利。

219、what’s going on? 發生什么事了？ The pump failed to work.泵出故障了。Fail to do sth...未能做某事。

220、what time will the cement truck come to the well site?

When will the cement truck come to the well site? 固井車什么時候到井？Boiler 鍋爐車 truckmounted boiler車載鍋爐 cement truck 水泥車 At about 10 o’clock am.大約早晨10點鐘左右。Am早晨

pm 下午 221、how much does this equipment weigh? Weigh.vi.稱重 weight.noun.重量 I don’t know the exact（準確的）weight.我不清楚確切的重量.222、How long will it take you to finish installing the workover rig? 安裝修井機大約需要多長時間？

It takes sb sometime to do sth.花費某人時間去干某事。Install 安裝 uninstall 卸載 Four hours is enough（足夠的）.4個小時足夠了。

223、what are well pullers doing? well puller 修井工 修井工們正在干嘛？ They are burying the deadmen.Bury 掩埋

他們正在埋繃繩錨。

224、have the installed guy lines(繩索，繃繩)? 他們安裝好繃繩了嗎？ No，they are installing guy lines.不，他們正在安裝繃繩。

225、how many guy(牽引)clamps（卡子）did they fit on the end of guyline? 他們在繃繩尾部安裝了多少個繃繩卡子呢？ Five clamps are fitted on each line.每條繩安裝5個卡子。

226、how many types of masts are used with production rigs? Mast = derrick.井架

采油作業機使用哪幾種類型的井架？

Two types: single(單身的，獨自的)and double pole（桿）mast.The conventional single.兩種類型：單桿架子和雙桿架子，最常見的事單桿架子。227、what is this figure(計算，圖解)? 這幅圖解的內容是什么呢？

Figure 2 represents(體現)a typical(常見，典型的)power train situation（位置，形勢）medium（中等的，媒介）depth（深度）workover rig.這是中等深度修井設備的典型傳動圖。228、have we got any other work to do?

for a 我們還有其他工作要去做嗎？ Please pull the guyline tight.請將繃繩拽緊。

229、what shall i do next?or what can i do for them next? 我下一步應做點什么？

Put the hydraulic tongs at a distance（距離，路程）,please.把液壓大鉗挪一點距離。

230、what are the well pullers doing? 修井工們在干嘛？

They are changing the old wellhead to a new wellhead.他們正在把老井口換成新井口。

231、when will you complete the surface pipeline connecting(連接)? 你們什么時候能夠完成地面管線的連接？ It will take our 3 hours to complete this work.將花費大約3小時的時間去完成這項工作。232、are you ready for pulling? 準備好起鉆了嗎？ Pooh = pull out of hole 起鉆

RIH=run in hole 下鉆 We will tell you as soon as we get ready.我們一準備好，就通知您。As soon as 一...就...233、does the bolt(螺栓)fit the nut（螺母）? 螺栓跟螺母匹配嗎？

Yes，their threads(線，螺紋)are the same.是的，他們的螺紋是相同的。

234、do you know how the pipelines are connected? 你知道管線如何被連接嗎？

This pipe is connected to the suction(抽吸)and that one over there to the discharge（流出）line.這根管子與上水管連通，那根管線與排水管連通。

七、有桿泵作業

235、how many types of lifting(舉升)systems are there in your oilfield（油田）? 在你們油田有多少種舉升方式？

There are sucker(吸盤、吸管)rod（桿）pumping,gas lifting,electric submersible（潛水器）pump and hydraulic pumping.分別有有桿泵、氣舉泵、電潛泵、水利活塞泵。

236、which pumps are by far(目前，迄今為止)the most widely used method? 目前為止，使用最廣泛的泵是那種方式? Sucker rod pumps are by far the most widely used method.有桿泵是目前使用最廣泛的一種方式。

237、how much percent(百分比)does sucker rod pumping account for（占...，說明）in you oilfield? 有桿泵在你們油田所占的比例有多少？

Sucker rod pumping accounts for approximately(近似，大約)80 percent of all artificial（人工的，人造的）lift wells in our oilfield.在我們油田，有桿泵大約占人工舉升井的80%。

238、when did people begin to use sucker rod pumping for the production of oil? 人們什么時候開始使用有桿泵進行油田生產？

In 1859，the system now called “conventional” rod pumping was well established(建立).在1859年現在叫做常規有桿泵系統已經被建造出來了。239、what does a rod pumping unit consist of(由...組成)? 有桿泵由哪幾部分構成？

The rod pumping unit consists of a brake ,a prime(原始的，最初的)motor,a gear reducer,a crank（曲柄）,a pitman（連桿，礦工）,counterweights（平衡塊）,a walking beam（梁）,samson posts（支柱）,a horsehead（驢頭）,a wireline hanger（懸繩器）,a polished（磨光的）rod,a stuffing（原料）box,sucker and rod pump,etc.Stuff=原料，物品 staff=員工，職工 stuffing box 防噴盒

有桿泵裝置由剎車裝置、原動機、變速箱、曲柄、連桿、平衡塊、游梁、支柱、驢頭、懸繩器、光桿、防噴盒、抽油桿、泵等部件組成。240、where are the pumping units made? 這些泵是哪里生產的？

The pumping units are made in the second petroleum machinery plant（植物，種植，工廠）.這些抽油泵是第二石油機械廠生產的。241、why do workover for this well? 這口井為何要修井作業？

Oil can not be pumped out of this well.這口井不出油了。

242、what’s the reason（理由）? What’s the problem? 問題在哪？

It is probably(可能)pump leakage（泄漏）.可能是泵漏了。

243、what’s the trouble with the well? 這口井咋啦？ Oil production has been very low recently.最近該井產量很低啊！

Recent最近percent比例 244、what’s the trouble with the downhole pump? 井下泵咋啦？

The trouble with downhole pump is in plunger(活塞).井下泵的問題出在活塞上。Plug vi塞 plung 塞子 lung肺 plunger 活塞 245、why doesn’t the well run? 為什么井停了？

The unit would not run ,because something had gone wrong with the casing.這口井沒有運轉起來的原因在于套管有故障了。Go wrong with(問題在于...)246、what are the conventional failures of the rod-pumped well? 有桿泵的最常見故障是什么？

The conventional failures of the rod-pumped well involve a pump leakage,a sand production ,a paraffinning,check valve failure(standing/travelling),sticking piston,and parted rods.Piston=plunger活塞 strict 嚴格 stick棍、粘。Stuck 過去分詞，卡鉆Steak牛排

抽油機的常見故障包括泵漏失、出砂、結蠟、游動凡爾和固定凡爾卡、活塞卡、抽油桿斷脫等。

247、when was the pump run down? 這臺泵何時下井？

The pump was run down on April 27 ,1997.1997年4月27日該泵下井。248、how long did the pump run? 此泵運轉多久了？ The pump ran three hours.此泵運轉3小時了

249、how long is the operation life of the sucker rod pump in this well? 這口井的有桿抽油泵的運轉壽命是多少？ Two hundred days.200天。

250、do you know the data of this well? 知道這口井的資料嗎？

Yes，i have read the workover plan,pump depth is 1473ft,pump size 2.75in,speed 8 spm,and stroke 100 in.是的，我看過作業設計，泵掛1472ft，泵徑2.75in，沖數8次/分，沖程100in。

完井液與修井液

251、what is a completion or workover fluid? 什么是完井液或修井液？

A completion or workover fluid is a fluid placed against the producing formation while performing such operations as well killing,cleaning out,drilling in ,plugging back,controlling sand, or perforation.完井或修井液是對生產層進行壓井、洗井、鉆進、上返，控制油層或射孔作業時使用的流體。252、what are the basic functions of workover fluid? 修井液的基本功能有哪些？

The basic functions of a workover fluid are to facilitate(促進)movement of treating fluids to a particular point downhole , to remove solids from the well,and to control formation pressure.修井液的主要功能是它容易注到井下指定地點，從井底將巖屑攜帶出來以及控制地層壓力等。

253、Does using workover fluid cause formation damage? 使用修井液會損傷地層嗎？ It is possibity is little.可能性比較小。

254、which point should be considered in selecting a workover fluid? 選擇壓井液時需要考慮哪些因素？

We should consider the fluid density（密度）, solids content , filtrate(濾失液)characteristics, fluid loss(損失),viscosity-related characteristics, corrosion products, mechanical(機械的)considerations, and economics.

第三篇：在國外呆了八年,總結的英語學習方法

在國外呆了八年，總結的英語學習方法

說起學英語，這真是個難度活，費時費力不說，結果還總是不盡人意。可是很少人覺得這是技巧活，都埋著頭苦學，大家一路以來都照著初中老師，高中老師的方法順理成章地學著，我也是經歷了這漫長的被教育過程，小時候背了很多課文，可現在沒半點有用，以前翻開課本后的單詞表開始逐一背誦單詞，可是也是效率低下。

其實對于任何一個項目，如果你知道你將會投入超過半年的時間去完成，那就值得在開始的時候，仔細地思考一下“方法”，這樣做絕對值得，它會在今后為你省很多功夫，并且在以后加微信usa_az的過程中隨時依進展情況而修改。像我們的中小學英語教育養成的方法：背單詞，聽寫，背課文，這一階段一學下來就是10來年，稀里糊涂有了這種習慣，又不去創新別的方法，于是到了大學4級，托福,GRE也一直沿用這種方法，雖然自己也意識到效率不高，但也沒積極想辦法去改進。

我要說的這種方法，是我在國外呆了近十年載后發現我以前學英語時應該做的調整，前段時間看了“漏屋”老師寫的《告訴你外語學習的真實方法及誤區分析》，覺得我和他的觀點不謀而合，他為我自成的方法提供了理論上的支持，在這里我很感謝“漏屋”老師所做的詳細研究。我們都同意“兩點”至關重要的因素：

1）首先靠聽力，別去依賴字形，別去訓練寫，一切一切從聽開始

2）為自己提供“i+1”的學習環境（這里借用漏屋老師的說法，簡單說“i+1”的意思是：i代表你現在的程度，+1代表永遠只去學之比你程度高那么一點點的新東西）。

首先說第一點： 為什么只強調聽，而忽略“說”“讀”“寫”。

我們人類生下來，語言的教學本來就是靠口口相傳的，大家也都知道語言環境的重要，現在請你回想我們以前的學習方法，翻開單詞本，首先單詞的拼法映入眼簾，后面跟隨著漢語解釋，這樣我們接觸的順序是：

一，視覺辨識拼寫法，來識別單詞

二，頭腦中翻譯中文意思

三，思考語音（這第三步有人讀得出來的會默默反應其讀音，有人讀不出來的就跳過了）。長期日積月累，你再聽到這個單詞，怎么能快速反應其意思呢，這造成我們在做聽力的時候，即便豎著耳朵，高度集中精力也反應不過來，原因是你根本沒和語音“第一時間親密接觸”過，你的第一接觸在視覺。所以我認為加微信usa_az我們學英語，要刻意地屏蔽掉視覺，只靠聽覺。不要說這個詞我聽不懂，請你給我看，這是錯誤的。而是我聽不懂，就請你用我能懂的詞去解釋給我聽，這就涉及到第二個問題：去聽什么，這又是一個非常關鍵的問題，下面我要講的是去聽“i+1“的東西。

第二點： 去創造”i+1"的語言環境。

這是一個非常值得思考的問題，怎樣去創造？大家語言程度有高低，比如有人程度很低，就像剛開始學英語一樣，只知道apple和pear，那他的+1可以去加一個cherry;如果某人程度很好，他的程度在arthritis, tendon,那他的+1可以去加一個acetabulum(關節窩)。我不希望大家去共學“新概念”，共學“4級課本”這種針對大眾的，不是針對你個人的，我希望你去添加你自己想學的詞匯。就剛才的arthritis來說，關節炎這個意思對很多人來說很少用，但對一個有關節炎在國外看醫生的人來說，就很有用，他一定要描述給醫生聽他生什么病。

那所以怎么創造自己的+1，我們借助錄音，這方面的軟件現在也很多。錄音時，錄你認為最能刺激你聽力的東西，你可以唱歌，可以自己翻譯，或讓朋友親人上陣。試想如果朋友惡搞你，錄一個放屁聲，再告訴你fart,你以后能忘記這個詞嗎？當然也不是所有詞都那么有意思，之后就是靠多聽來刺激，完全拋開扔掉書本，反正你有錄音存證了，書上寫的orange難道和你錄的orange不一樣嗎？當然是一樣的，所以書本那種死的東西不再去看也罷。別去想這個詞怎么寫，也不用急著說，只是訓練聽到就馬上反應出來這個過程。

第四篇：在國外用餐的常用餐廳英語

在國外用餐的常用餐廳英語 1.尋問餐廳

Could you recommend a nice restaurant near here? 是否可介紹一家附近口碑不錯的餐廳? Is there a Chinese restaurant around here? 這附近是否有中國餐廳?

I want a restaurant with reasonable prices.我想去一家價位合理的餐廳。

Are there any inexpensive restaurants near here? 這附近是否有價位不貴的餐廳?

I'd like a quiet restaurant.我想去一家不會吵雜的餐廳。

Do you know of any restaurants open now? 你知道現在那里還有餐廳是營業的嗎?

I'd like a restaurant with cheerful atmosphere.我想去一家氣氛歡樂、活潑的餐廳。I'd like to have some local food.我想嘗試一下當地食物。

Could you recommend that kind of restaurant? 是否可建議這一類的餐廳? Where is the nearest ltalian restaurant? 最近的意大利餐廳在那里?

Where is the main area for restaurants? 此地餐廳多集中在那一區?

2.餐廳預約

Do I need a reservation? 我需要預約位子嗎? Nine o'clock should be O.K.9點應該沒問題。

I'd like to reserve a table for three.我想要預約3個人的位子。

what do you have for today's special? 今天的推薦餐是什么? We are a group of six.我們共有6個人。

We'd like a table with a view of garden.我們想要面對花園的位子。

We'll come around eight o'clock.我們大約在8點到達。

It's O.K.Your name, please.沒問題。請給我你的名字。

How can I get there? 我要如何才能到達餐廳? My name is Jessica Yang.我的名字是潔西卡．楊。

I'd like to reserve a table for two at seven tonight.我想要預約今晚7點2個人的位子。Do you have a dress code? 餐廳是否有任何服裝上的規定?

I'm sorry.We have so many guests this evening.我很抱歉。今晚的客人相當多。

ould the ladies wear formal dresses? 女士是否需著正式服裝?

How long is the wait? 我們大概需要等多久? No jeans, please.請不要穿牛仔褲。

3.餐廳點餐篇

May I have a menu,please？ 請給我菜單。

May I order,please？ 我可以點餐了嗎？

Do you have a menu in chinese？ 是否有中文菜單？

What is the specialty of the house？ 餐廳最特別的菜式是什么？

Would you like something to drink before dinner？ 在用晚餐前想喝些什么嗎？

Do you have today`s special？ 餐廳有今日特餐嗎？

What kind of drinks do you have for an aperitif？ 餐廳有些什么餐前酒？

Can I have the same dish as that？ 我可可以點與那份相同的餐嗎？

May I see the wine list？ 可否讓我看看酒單？

I`d like appetizers and meat(fish)dish.我想要一份開胃菜與排餐(魚餐)。

May I order a glass of wine？ 我可以點杯酒嗎？ I`m on a diet.我正在節食中。

What kind of wine do you have？ 餐廳有那幾類酒？

I have to avoid food containing fat(salt/suger).我必須避免含油脂(鹽份/糖份)的食物。

I`d like to have some local wine.我想點當地出產的酒。

Do you have vegetarian dishs？ 餐廳是否有供應素食餐？

I`d like to have Frence red wine.我想要喝法國紅酒。

How do you like your steak？ 你的牛排要如何烹調？

Could you recommend some good wine？ 是否可建議一些不錯的酒？

Well done(medium/rare),please.全熟(五分熟/全生)。

4.餐廳用餐

Could you tell me how to eat this？ 請告訴我要如何食用這道菜？

Is coffee included in this meal？ 有咖啡做為附餐嗎？

Could you pass me the salt（pepper）? 請把鹽（楜椒）傳給我。May I smoke？ 可以抽煙嗎？

I'd like a glass of water, please.請給我一杯水。

My order hasn't come yet.我點的食物還沒來。

May I have a bottle of mineral water？ 請給我一瓶礦泉水。

This is not what I ordered.這不是我點的食物。

Uncarbonated mineral water, please.請給我不含碳酸的礦泉水。Check, please.麻煩請結帳。

May I have some more bread, please.請再給我一些面包。Can I pay here？ 可以在這兒付帳嗎？

I'd like a dessert, please.請給我一些甜點。

We like to pay separately.我們想要分開算帳。

What do you have for dessert？ 甜點有那幾種？

I think there is a mistake in the bill.帳單有一些錯誤。

May I have some cheese？ 可以給我一些芝士嗎？

Could you check it again？ 可不可以麻煩再確認一次帳單？

What kind of cheese is this？ 這是什么口味的芝士？

Can I pay with this credit card？ 可以用這張信用卡付帳嗎？

May I have just a little of it？ 可以給我一點這個嗎？

May I have the receipt, please.請給我收據。

Can I have some fruit instead of the dessert？ 可不可以不要甜點改要水果？ 5.快餐餐廳用餐篇

Will you be eating here or is this to go(take out)？ 在這里用餐或帶走？ I'll eat here.在這里用餐。

Take out,please.帶走。

I'll have a small hamburger,milk,and one large order of French fries.請給我一個小漢堡、牛奶和一份大份薯條。

Can I sit here？ 我可以坐這里嗎？

Can I have a hot dog,please？ 請給我一份熱狗。

With ketchup or mayonnaise？With ketchup,please.加蕃茄醬或美乃滋？請加蕃茄醬。

How about onions or mustard？Yes,please.要加洋蔥或芥末嗎？好的。

A sandwich,please.請給我一份三明治。

Which would you like for bread？White or whole wheat？ 你想要什么口味的面包？白面包或全麥面包？

Whole wheat,please.請給我全麥面包。

I'd like roast beef with Swiss cheese,tomato,and lettuce.我要烤牛肉加瑞士乳酪、蕃茄與萵苣。

Can I take this seat？ 我可以坐這個位子嗎？

Where can I get a knife and fork？ 我在那里可以拿到刀與*？

Bourbon with soda water,please.請給我波本酒加蘇打水。

Could you show me something to certify your age？ 可否出示能證明年紀的文件？

第五篇：出國英語之打出租車的英語怎么說

出國英語：打出租車的英語怎么說

打出租車英語怎么說

I need a cab

打出租車常用英語詞匯：

as soon as possible 盡快

address 地址

sidewalk 人行道

out front 在大樓前面；在房子前的街上

Please step on it 請開快點

Keep the change 不用找零了

打出租車常用英語句型：

I'd like to order a taxi...我想預定一輛出租車...I need a cab as soon as possible please.請盡快給我派一輛出租車。

I'm standing out front on the sidewalk.我就站在門前的便道上。

Could you help me put the luggage in the trunk?

你能幫我把行李放到行李箱里嗎？

Take me to the airport.送我去機場。

I'm really in a hurry,so can you take the quickest route please? 我實在是很趕時間，您能盡量開最快的速度嗎？

I'm in a hurry.Please take a shortcut.我趕時間，請抄近路。

How much is the fare please?

請問多少錢？

I need a receipt.我要發票。