第一篇：工業工程師2015年度工作總結

個人年度總結

一、2015年工作內容

1、新項目線體規劃，工藝分析

1.1、CD539項目，福特銳界扶手線體布局。整體布局理念是以熱板焊機器為參考點，采用U型布線。1.2、B11FL項目，眾泰T600扶手線體布局。在徐經理指導下，第一次對產品工藝進行解析，產品工裝進行輸出。工藝分析過程中，識別出面套卡條與注塑件卡口不匹配問題，改善后節省50%的工時。另外制作磁鐵防錯工裝，避免磁鐵安裝不匹配的風險。

1.3、KC-1項目，吉利博瑞頭枕線體布局以及工藝分析。第一個DV項目的工藝分析，識別了比較多的批量生產分險，通過推動跨部門的工藝評審會議，將開啟的重要問題點都解決關閉掉。

1.4、E2LB/E2SC項目，君威/邁銳寶頭枕骨架項目線體布局。過程中項目工程師新增了3副工裝，同時項目工藝變更對布線以及工裝有很大的影響，后續加強與項目工程師的溝通，更詳細的解析每個項目產品。

1.5、bora derivate項目，大眾寶來兩廂車的頭枕扶手線體布局以及工藝分析。1.6、S700項目，北汽SUV扶手。

1.7、NL-3項目，吉利博悅前扶手線體布局與工藝分析。1.8、G7S項目，高爾夫7項目的頭枕涂油工裝制作。

1.9、C84/P84項目，雪鐵龍/標致扶手頭枕項目工藝分析，輔助徐經理識別生產風險點，開展工藝難點交流會議。

2、布局改善

2.1、B#F2打包區域改善。

通過近1周的跟進，發現打包員工在待打包物料池找尋目標打包物料耗時較長。另外打包人員不能明確知道目標打包物料的具體數量，這一現象會導致打包產品頻繁切換，耗時，線邊增加未打包完成的半托物料。改良后，將待打包物料根據項目區分開，待打包目標物料一幕了然，實際效果跟蹤后也比較理想。

2.2、A#F2物料區域整改。

將泡沫周轉車區域與托盤物料區域區分開來，同時將空閑區域利用起來，作為員工休息區。定義打包區域的區域劃分，溝通裝配與配送中心負責人，定時拉走待入庫成品，降低成品堆積的問題。

空原閑本 區打 域包車周泡

3、流程標準化

3.1、沈陽繼峰項目收尾，制作完成沈陽目視化看板的中英文版本。3.2、參與廠房布局流程標準化梳理，整理相關的輸入輸出資料模板。

3.3、參與項目工藝分析資料梳理，整理相關的輸入輸出資料模板，另外定義資料具體的輸入輸出時間點。

3.4、定義線體評審文件，工裝評審文件，并找體系進行標準化。

4、其它

4.1、在屠總指導下，輔助配送中心主任進行配送中心人員工作量調查核實。通過數據采集分析，發現配送過程中存在的一些可改善點，為配送中心人員調整提供了參考數據。

4.2、輔助注塑車間經理進行注塑車間注塑機需求核實，為注塑車間的擴產提供理論依據。4.3、2CN扶手注塑件周轉車設計以及投資回報期計算，為是否制作產品周轉器具提供理論依據。轉沫

二、學習成果

1、布局規劃

1.1、數據處理方面：

在沈陽繼峰項目順利驗收后，通過自己的總結，在數據分析處理上，自己有了一個較大的進步。這一次的成都工廠調整，給了我一個獨立采集、分析、處理數據的機會，最終的輸出結果相對準確地反應了成都工廠的實際情況。1.2、廠房布局方面：

成都工廠的廠房布局，有了我自己的考慮，不再是純粹的復制黏貼。會結合整體的物流走向去改變局部的規劃，雖然做不到完美，相對于一年前的我還是有了一個比較明顯的進步。1.3、新項目的線體布局方面：

隨著工藝分析的跟進，對每一個新項目有了更進一步的認識。生產分險的識別，工裝的識別讓自己能更好的將線體與產品結合。

2、工藝分析

2.1、產品工藝分析：

加強對產品的了解，通過與徐經理討論溝通，識別出新產品在投產階段會出現的問題與風險，開啟問題清單，組織跨部門溝通會議，通過跨部門合作盡可能在DV或者PV階段關閉問題清單，為后續的批量生產打一個良好的基礎。2.2、工裝夾具設計：

積極與研發、項目、工裝科溝通，通過改善產品結構，制作合適的工裝夾具為批量生產打下基礎。

3、交流溝通

跨部門的會議推進，提高了自己的溝通能力，整合能力以及協調能力。一個合適的溝通平臺，將項目所有相關部門信息整合到一起，避免了信息的不公開性，減少各個部門的重復勞動。

三、2016年方向

1、布局規劃

希望公司組織去看看電子行業的拉動式生產方式，公司內部結合LED以及電子掃描等設備，能時實抓取生產的效率數據。讓員工的生產效率以數據的形式讓各個部門看到，從而發現生產過程中的浪費，進行改善，提高企業勞動成本上的競爭力。

設計試制車間的IE功夫道場，結合柔性制造與新品試制導入于一體。

2、產品工藝分析

細化產品的工藝分析，盡可能早地介入產品項目，參與2D/3D圖紙的評審，降低后續的改善成本。積累各個項目的經驗參數，與試制工藝工程師多溝通，向他們多請教，與徐經理多溝通，提高自己工藝分析能力。

3、提高

能多點參觀先進的生產企業，對廠房布局規劃提供現階段的較為先進的理念。加強自己的產品圖紙分險識別能力，對經驗數據進行積累，為產品工藝分析的準確性打下基礎。

第二篇：英文簡歷(工業工程師)

英文簡歷（工業工程師）INDUSTRIAL ENGINEER

Sandy Lin 15/F,TOWER2 ,BRIGHT CHINA,BUILDING1,BEIJING.PROFESSIONAL EXPERIENCE

1985-Present LEYNER CORPORATION,Lake Charles,LA

Industrial Engineer

Provide floor support engineering in printed wire assembly(PWA)and subsystem assembly(SSA)areas.Purchase capital equipment.Interface with vendors.Justify expenditures.Design plant layout fixtures,and flow charts of material.Program automatic equipment.Write process sheets and rework procedures.Recommend changes to product to allow ease of manufacture.Implement design changes.Inititate methods and process improvements.Troubleshoot problems.Effect disposition or rejection of material.Provide assistance to all other departments.1984 PRUDENCE D.MCHARRISON LABORATORY,Ruston,LA

Engineering Assistant

Conducted variety of tests including Tensile.Compression,and creep tests on molded parts.Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.Designed tools and fixtures for Instron machine.1982/83 DUCHESS COMPONENTS,Baton Rouge,LA

Molding Room Attendant,1983

Operated and maintained machine producing epoxy preforms.Maintained records on inventory,loss of material,and quality control.Machine shop attendant,1982

Operated lathes,milling and grinding machines;monitored welding and heat treatments.Read blueprints.EDUCATION

LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LABachelor of Science Degree in Industrial Technology,1985

Minor concentration in computer science.PROFESSIONAL AFFILIATIONS/CERTIFICATIONS

Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.NOTICE

Relevant Work experience is emphasized while other positions are de-emphasized.Chronological format illustrates a clear career path.更多簡歷模板請?jiān)L問http://

最專業的簡歷模板網站

第三篇：英文簡歷-工業工程師英文簡歷

PROFESSIONAL EXPERIENCE

1985-Present LEYNER CORPORATION,Lake Charles,LA

Industrial Engineer

Provide floor support engineering in printed wire assembly(PWA)and subsystem assembly(SSA)areas.Purchase capital equipment.Interface with vendors.Justify expenditures.Design plant layout fixtures,and flow charts of material.Program automatic equipment.Write process sheets and rework procedures.Recommend changes to product to allow ease of manufacture.Implement design changes.Inititate methods and process improvements.Troubleshoot problems.Effect disposition or rejection of material.Provide assistance to all other departments.1984 PRUDENCE D.MCHARRISON LABORATORY,Ruston,LA

Engineering Assistant

Conducted variety of tests including Tensile.Compression,and creep tests on molded parts.Responsible for production of plastic test specimens,and mounting polishing,and microscopic analysis.Designed tools and fixtures for Instron machine.1982/83 DUCHESS COMPONENTS,Baton Rouge,LA

Molding Room Attendant,1983

Operated and maintained machine producing epoxy preforms.Maintained records on inventory,loss of material,and quality control.Machine shop attendant,1982

Operated lathes,milling and grinding machines;monitored welding and heat treatments.Read blueprints.EDUCATION

LOYOLA UNIVERSITY AT NEW ORLEANS,College of Engineering,New Orleans,LABachelor of Science Degree in Industrial Technology,1985

Minor concentration in computer science.PROFESSIONAL AFFILIATIONS/CERTIFICATIONS

Member,Society of Manufacturing Engineers,Leaner Management Club Certified Manufacturing Technologist and Solderer.NOTICE

Relevant Work experience is emphasized while other positions are de-emphasized.Chronological format illustrates a clear career path

第四篇：工業工程師崗位職責

1.跟蹤生產線狀況(工藝流程、設備產能、人員安排、場地規劃等)，收集和分析勞動生產率。

2.協助規劃工程師制定標準工時。

3.組織與生產直接相關的工程技術人員對生產作業引進分析改善，優化生產流程，節約成本和不斷提高勞動生產率。

4.負責人員滾動計劃和規劃工作。

第五篇：工業工程師英文自我介紹

工業工程師英文自我介紹

I would like to apply for the post of industrial engineer, which your company offered.I feel that I am the right sort of person for the post because my qualifications and experience are really suitable for the position.I expect to graduate in July from the Department of Industrial Engineering of ANYJOB University of Science and Technology, majoring in industrial engineering.During my college years, I have worked very hard at my major courses, so as to lay a solid foundation of theoretical knowledge.As a result, I have passed all the examinations and achieved excellent academic results in major courses such as statistics, operation researches, system engineering, business management, logistics, Statistics and Probability Theory，Professional English, Metalworking Practice, Electrical Engineering Practice, Linear Algebra.Moreover I have passed CET-4 and National Computer Level Test-Rank Three.Outside classroom, I was very active and took part in different social activities.In my junior year, I served as monitor of my class, and received Advanced Person of Jiangxi University of Science and Technology.Since September 2004, I worked as a part-time business controller at Angel of Ganzhou, and raised our products’ share by 48.28 percent by 2005.In addition, I worked rather actively and successfully in certain student’s societies.All those experiences contributed much to the development and promotion of my organizing and social abilities.I wish to assure you that, if successful, I would endeavor to give you every satisfaction.It would be greatly appreciated if you grant me an opportunity of an interview.At that time, I will present my credentials.I can be reached by phone at XXXXX or email me at ANYJOB@ANYJOB.com

Enclosed please find a resume, a copy of the recommendation form and the official transcript, Thank you for your time and consideration.參考：中山易搜人才網

http://zs.anyjob.cn/